Im toying with the idea to sell my LT1 and run a gen1 in place of it, I was wondering what kinda of $ I could get for it. Has around 15k miles on it. Specs are:

LE1.5 heads (le2 heads with stock valves)
Cosworth forged pistons 4.00 bore (flat top close around 11.4:1)
SCAT 6.125 pro series I beams
SCAT 3.48 cast crank
Melling 10552 oil pump
Comp 1.6 pro mag NSA rockers 3/8 stud
GM guide plates
Comp 1 pc 7.2 pushrods
AFR hydra-rev kit
Rollmaster dual timing chain
Studed 2 bolt mains and heads
Crane 10535 lifters
Delteq
MSD DIS-4
Lunati voodoo 60123 cam

The heads have beehives on them now, but the motor needs more spring pressure so I have a set of k800's with TI retainers I could install if the buyer wanted.

 

So after some searching I'm thinking $4000 MOL. Sound about right?

 

sounds a little high but i could be wrong. mostly just because its stock cubes..turns a lot of people off.