Moser 12 bolts, 1k miles, 4.11 gears and a true trac diff, 1350 yoke - $1850PENDING
LT4 Knock Module - $65 shipped
93-96 Console base with the elusive good lid - $175
97-02 Dash for use in conversion in 93-96 cars - $125
97-02 Manual console with pass cup holder, good console lid, and m6 shifter plate, PERFECT - $200
QA1 12way 'r' adjustable front struts with 315lb springs & rear 12way adj shocks, Full set of spanner wrenches included, 1k miles on them only - $675 shipped for the set
Hidden trailer reciever for all 93-02 - $60
NEW OEM GM dash pad for 93-96, brand new in GM box - SOLD
Denny's Aluminum Driveshaft, 3.5", 4l60e/t56 with a 12 bolt, 1350 ujoints - $300
RP 1/4" thick sidewall Aluminum Driveshaft 3.5", 4l60e/t56 with a 9", 1350 ujoints - $250
SLP Loudmouth, not welded, dual slash cut 4" tips, fully stainless from cat back, Excellent condition - $250
C5 Z06 Front brake conversion, complete setup - SOLD
LS1 front brake conversion for LT1s - $175
Metco solid boxed lower control arms - $125
BMR Boxed lower control arms, red - $95
RPM motorsports trans mounted torque arm (only works with m6), black - SOLD
BMR Track Pak torque arm kit with universal Crossbrace, black - $350
UMI double adjustable Roto joint lcas & panhard rod, red - SOLD
UMI Tubular weld in sub frame connectors, red - SOLD
UMI Lower control arm bolt in relocation brackets, red - $75
??? Brand Bolt in Lower control arm brackets, black - SOLD
Double adjustable red BMR panhard rod - $95
Double adjustable black UMI panhard rod, poly ends - SOLD
Edelbrock boxed lower control arms, spherical ends - $125
Spohn body mounted torque arm, black, driveshaft saftey loop - $325
Spohn red driveshaft safety loop - $70
http://www.spohn.net/shop/1993-1997-...fety-Loop.html
Granatelli stock style 78mm MAF- $150
Z06 85mm MAF - $45 or $65 with brand new conversion harness
SLP 85mm MAF - $125
Stock screened MAF- $45
Ported-polished stock MAF - $75
Tail light blackouts - $20
Front headlight blackouts (no mounting hardware - $10
Cloth indoor car cover - $35
Hurst 'H' Leather shift **** -SOLD
SLP leather shift **** (same as hurst 'H' **** but says slp in small letters) -SOLD
Pro 5.0 with ws6 store short stick - $150
B&M short throw shifter - $100
Hurst Billet Plus shifter - $140
Hurst SS OEM style shifter - $100
LS1 lid base for LT1 conversion - $40
Vantage Driver's side sub box and 10" World Products sub - $150

 

Hi,

I'm interested in the lower control arms and relocation brackets. Need more info and pics in order to decide.

Thanks

Bud

 

http://www.ls1tech.com/forums/parts-...l#post14353191

LS1tech is a little more friendly for pics so you can view a lot of them there...

(Note that some of the pics are a few posts down...)

 

That Ultra Z hood you have what year is it for and do you have pics??

 

The ultra z hood is for a 98-02....

 

Off brand lca relocation brackets and dash pad are SOLD!

 

damn. I some how missed the dash pad....

 

Haha sorry.... Ive got a couple more but they are for 97-02s Camaros and 93/02 T/as ....

 

if you get one again for 93-96 camaro lemme know I'll buy it from you..
Thanks got the SLP spacers today..for all those looking to buy from this guy..he's an A+ seller..

 

X2 ive bought countless things from over the past year. Awesome seller!

 

What do you want for one of the 97 pads shipped to 43332?

 

what are you including with the ls1 brake setup? could you send me some pics if you have any to orbitalchrisz28@yahoo.com?

thanks alot man

 

It will come withe the rotors, calipers, spindles/hubs, brake lines, pads, all bolted together and ready to drop in and install... I don't ahve pic at the moment but can get some in the next cpl days...


The 97-02 dash pads I have have a 1/2" crack from the very rear across to the defroster vent. Other than that they are perfect for $75 plus shipping. Shipping costs $20-30 normally.

 

awesome. i would still need to get knuckles correct?

 

The knuckles (spindles) are included, there is nothing else you would need....