Some LT1 parts & block
Thread Starter
Registered User
Joined: Apr 2005
Posts: 562
From: Platteville, WI
Some LT1 parts & block
I've got a wide range of parts all from a 95' LT1
ADDED Cam & valvetrain
LT4 Hotcam, bought brand new from GM, ~3,000 miles on it. Still looks brand new!(getting a blower cam) ~200$ (300$ new) SOLD!
Valvetrain to go with LT4hotcam. Springs Comp cams hardened 7* locks&retainers ~50$ Price drop!
Comp Cams 1.6 Alum. widebody RR NSA (~500$ from jegs!) 300$!!!!
Stock De-screened MAF (going speed density) 50$
Stock Pistons, rods and rings still together (2 sets) 50$ each set
Stock LT1 block, std. bore, need line-bored (Good when installing 4 bolt splayeds) ~70,000 miles ~150$
Cast Alum. intake elbow w/ NOS nozzle hole 50$
Stock A/C pump & condenser (Both work 100% & hold charge!, removed @ 60K miles!) 50$ for each!!
BRAND NEW NEVER USED Napa ICM, still in box w/ grease and all! 50$, retails for over 100$!!!!
Stock valvetrain (8 exh. 7 Intake valves & retainers w/ all keys & springs) (bent 1 intake valve) ~50$ OBO!
Stock LCA w/ ~75,000 miles and rubber mounts 50$ OBO!
Custom Solid Roller (NA/N2o) Cam from Cam motions, have specs 150$ OBO!
All of it needs to go
ADDED Cam & valvetrain
LT4 Hotcam, bought brand new from GM, ~3,000 miles on it. Still looks brand new!(getting a blower cam) ~200$ (300$ new) SOLD!
Valvetrain to go with LT4hotcam. Springs Comp cams hardened 7* locks&retainers ~50$ Price drop!
Comp Cams 1.6 Alum. widebody RR NSA (~500$ from jegs!) 300$!!!!
Stock De-screened MAF (going speed density) 50$
Stock Pistons, rods and rings still together (2 sets) 50$ each set
Stock LT1 block, std. bore, need line-bored (Good when installing 4 bolt splayeds) ~70,000 miles ~150$
Cast Alum. intake elbow w/ NOS nozzle hole 50$
Stock A/C pump & condenser (Both work 100% & hold charge!, removed @ 60K miles!) 50$ for each!!
BRAND NEW NEVER USED Napa ICM, still in box w/ grease and all! 50$, retails for over 100$!!!!
Stock valvetrain (8 exh. 7 Intake valves & retainers w/ all keys & springs) (bent 1 intake valve) ~50$ OBO!
Stock LCA w/ ~75,000 miles and rubber mounts 50$ OBO!
Custom Solid Roller (NA/N2o) Cam from Cam motions, have specs 150$ OBO!
All of it needs to go
Last edited by VK; Apr 9, 2007 at 05:41 PM.
Thread Starter
Registered User
Joined: Apr 2005
Posts: 562
From: Platteville, WI
I'm located about 30min from the IL boarder. Only about 30min from Dubuque IA also. So i'm pretty much at the south western most part of Wisconsin. Block is sitting in my shop all torn down (no interals or bearings) got oil pump, pan, timing chain & gears, interals.. the whole works. So just let me know when you would be down and you can decied what you want.
