LT1 solid roller top end

-LT1 fully ported heads, 2.00/1.56" valves, machined for 1.55" springs
-270/205cfm at .600" lift (have complete flow numbers for heads)
-heads fully freshened/cleaned, professionally ported
-Comp 7/16" studs/guideplates
-Comp 943 Pacalloy valvesprings w/Ti retainers and 10* locks
-Cam motions solid roller 254/262 .652/.636" 111.7 LS w/1.52 rocker
-Fully ported LT1 intake manifold opened to 58mm
-Fuel rails
-Comp cams 973 solid roller lifters (brand new)
-Comp cams 1.52 ProMagnum roller rockers (brand new)
-LPE 58mm throttle body
-LT4 valvecovers
-extra set of 943 Pacalloy valvesprings! ($275 new)

The cam was spec'd for great NA power and also for up to 200hp shot of spray. 10s NA on a stroker, 9s on the hose.

This is the correct lifter/valvespring combo, which is what makes solid roller setups reliable.

All stuff is either new or fresh/clean. Just need pushrods

$3100

jhsformula@aol.com