Sbc Short Block 357 358
Thread Starter
Registered User
Joined: Jan 2006
Posts: 124
From: 08080 NJ
Sbc Short Block 357 358
SBC SHORT BLOCK for lack of a better term...
This will make a great base for you next small block Chevy project.
-Chevy 010 block .030" over with billet 4 bolt main caps, ARP studded mains, torque plated, line honed, screens installed, clearanced for 3.8" crank, decked, etc
-Lunati race series 3.5" crankshaft
-New coated bearings
-6.25" Fluidampr for internal balance
-Cloyes Hex-adjust double roller timing chain
-Chrome timing cover
-Custom Schneider roller cam (630 lift,322/282@.050,112 LSA)
-Crower solid roller lifters
-New Comp pushrods (7.800")
Basically a killer short block minus rods and pistons for $1500. The crank alone cost that much.
Will separate valvetrain for $500, block for $500, and crank/damper for $750.
Follow link for more pictures:
http://s44.photobucket.com/albums/f1...short%20block/
I also have a new MSD 85551 distributor with both style caps and an Eagle 435037506000 forged 383 crank cut 20/20 (stronger radius) for $250 each.
All items in 08080 South Jersey. Delivery and shipping available.
John
1 856 905 1908
JohnNeville@Gmail.com
This will make a great base for you next small block Chevy project.
-Chevy 010 block .030" over with billet 4 bolt main caps, ARP studded mains, torque plated, line honed, screens installed, clearanced for 3.8" crank, decked, etc
-Lunati race series 3.5" crankshaft
-New coated bearings
-6.25" Fluidampr for internal balance
-Cloyes Hex-adjust double roller timing chain
-Chrome timing cover
-Custom Schneider roller cam (630 lift,322/282@.050,112 LSA)
-Crower solid roller lifters
-New Comp pushrods (7.800")
Basically a killer short block minus rods and pistons for $1500. The crank alone cost that much.
Will separate valvetrain for $500, block for $500, and crank/damper for $750.
Follow link for more pictures:
http://s44.photobucket.com/albums/f1...short%20block/
I also have a new MSD 85551 distributor with both style caps and an Eagle 435037506000 forged 383 crank cut 20/20 (stronger radius) for $250 each.
All items in 08080 South Jersey. Delivery and shipping available.
John
1 856 905 1908
JohnNeville@Gmail.com
Last edited by SS86; Jan 15, 2007 at 09:08 AM.
Thread Starter
Registered User
Joined: Jan 2006
Posts: 124
From: 08080 NJ
Not sure what part your asking about in particular. The crank is for a 2 piece seal gen 1 block and the dist probably won't work (you guys use Optispark or something?). The short block is Gen 1 and will hold about 900 horses.
Thread Starter
Registered User
Joined: Jan 2006
Posts: 124
From: 08080 NJ