s/c 383 for sale
s/c 383 for sale
Member Since: Apr 2002
port saint lucie
florida Gauging interest in parts
--------------------------------------------------------------------------------
Due to my grandfather passing away. i will be parting out a project that was never really finished. i am debating selling everything as a lot or parting it out. (Trying to get the most money for my grandmother).
the vette was a 1994 auto parts are as follows:
LT1 block with Flatlander racing 383 kit
scat forged crank
eagle rods
je blower pistons 9.5:1
blower pins
crane 1:6 roller rockers
lt4 heads and intake ( brand new)
lt4 hot cam (brand new)
tpis long tube headers/jet hot coated(new)
new opti and pump
36 lb/hr injectors
paxton sn series s/c just back form california(new *****, upgraded impellar and seals. with 6 and10 psi pulley.
engine will be complete, all acessories, pumps wiring ect.
trans would be optional, has about 15k miles since rebuilt.
all parts in the engine are new, only thing used was the origional block.
The engine has only tune time on it. it was driven about 200 miles . since install. i have another stock engine for the car and will pull this one out once sold.
i know there has been alot of time and money put into this engine and will accept offers. if you want pics or want to come by to see it just drop me an email. irnash@adelphia.net
port saint lucie
florida Gauging interest in parts
--------------------------------------------------------------------------------
Due to my grandfather passing away. i will be parting out a project that was never really finished. i am debating selling everything as a lot or parting it out. (Trying to get the most money for my grandmother).
the vette was a 1994 auto parts are as follows:
LT1 block with Flatlander racing 383 kit
scat forged crank
eagle rods
je blower pistons 9.5:1
blower pins
crane 1:6 roller rockers
lt4 heads and intake ( brand new)
lt4 hot cam (brand new)
tpis long tube headers/jet hot coated(new)
new opti and pump
36 lb/hr injectors
paxton sn series s/c just back form california(new *****, upgraded impellar and seals. with 6 and10 psi pulley.
engine will be complete, all acessories, pumps wiring ect.
trans would be optional, has about 15k miles since rebuilt.
all parts in the engine are new, only thing used was the origional block.
The engine has only tune time on it. it was driven about 200 miles . since install. i have another stock engine for the car and will pull this one out once sold.
i know there has been alot of time and money put into this engine and will accept offers. if you want pics or want to come by to see it just drop me an email. irnash@adelphia.net
Last edited by oldsalt; May 25, 2005 at 04:51 PM.
Re: s/c 383 for sale
here is a link to some pics. the s/c is polished but a little dull from sitting .
http://www.imagedump.com/index.cgi?pick=get&tp=106123
http://www.imagedump.com/index.cgi?pick=get&tp=106124
can be seen and driven. still needs a little tuning .it is complete you can reach me at 772-528-3832 i am in south florida.
http://www.imagedump.com/index.cgi?pick=get&tp=106123
http://www.imagedump.com/index.cgi?pick=get&tp=106124
can be seen and driven. still needs a little tuning .it is complete you can reach me at 772-528-3832 i am in south florida.
Re: s/c 383 for sale
it has never been on ebay. if it doesn't sell in the next week or so , i might list it there though . the car has been at my grandparents until about a week ago. it was one of the project vettes he had. all that was needed to finish it was a air intake system that was in the works and the car needs paint. i would like to keep the car but would like a stock motor. i have another lt1 and 6sp trans i will put in once the s/c motor and trans is removed. it runs like a scared cat but it is a little too much for my wife to drive around town.
i am accepting reasonable offers. irnash@adelphia.net
i am accepting reasonable offers. irnash@adelphia.net
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
Drtryder
LT1 Based Engine Tech
10
Apr 22, 2015 04:17 PM



