Race TH400, MSD 6BTM, 3.73 gears and posi, and more F/S/T
11-15-2003, 02:21 PM
#1
Registered User
Thread Starter
Join Date: Sep 2002
Location: Cape Coral FL
Posts: 112
Race TH400, MSD 6BTM, 3.73 gears and posi, and more F/S/T
I got a built TH400 (enough to handle my stroked and supercharged Z28) and EVERYTHING needed to install it.
Lookin a T56 trade but offers are also good
Also have a MSD 6BTM for sale, works good
Finally are some 3.73 gears and posi unit, also works good
Also have 3.33 vortech supercharger pulley and belt
i also have some stock 1.5 rockers, egr valve, air pump and egr bracket and stuff, stock 93-97 amber corner signals, and stock spoiler (white)
Lookin a T56 trade but offers are also good
Also have a MSD 6BTM for sale, works good
Finally are some 3.73 gears and posi unit, also works good
Also have 3.33 vortech supercharger pulley and belt
i also have some stock 1.5 rockers, egr valve, air pump and egr bracket and stuff, stock 93-97 amber corner signals, and stock spoiler (white)
Last edited by Fast S/C '94Z; 11-15-2003 at 09:11 PM.
11-15-2003, 04:01 PM
#4
Registered User
Thread Starter
Join Date: Sep 2002
Location: Cape Coral FL
Posts: 112
Well, its got a TH400 w/ built up internals, deep pan, 2 b&m coolers w/ a fan, all the speedo stuff already, custom crossmember, chromoly driveshaft w/ 1350 slip yoke, b&m nitrous holeshot 2500 (i think) converter (mounts to stock flexplate), b&m megashifter, i shortened and strengthened the stock torque arm and mounted it to a lakewood driveshaft safety loop which mounts where the g-load brace goes, and probably a lot more stuff. I paid nearly 2000 on the tranny and converter alone not including the coolers, crossmember, driveshaft, . shifter, torque arm w/ safety loop, and other stuff i cant remember. i really dont what to ask or what your expecting and i know im not got gonna get anywhere near what i paid but throw up an offer
11-17-2003, 02:38 AM
#6
Registered User
Join Date: Dec 2001
Location: Chicago, IL
Posts: 3,674
11-17-2003, 02:54 AM
#7
Registered User
Join Date: Feb 2003
Location: Naperville
Posts: 1,110
I have a set of 15X10 weld draglites for sale with 7.5" BS, excellent shape just had them repolished. One has a minor dent in the lip, doesn't affect sealing or anything though. They're drilled for screws and I will also include the screws. They are 180+shipping new each, I'd like to get 250+shipping for both of them. If you're interested I can get you pics.
11-17-2003, 10:02 PM
#9
Registered User
Thread Starter
Join Date: Sep 2002
Location: Cape Coral FL
Posts: 112
The trans has less than 8000 miles, and for the entire conversion kit, i was for around 2000 but its very negotiable
It is a 3 series carrier and i would like 170 for both.
On the rims, do they have rubber? pics would be good.
It is a 3 series carrier and i would like 170 for both.
On the rims, do they have rubber? pics would be good.
