QA1/HAL 12 Way Single Adjustable Shocks
#1
QA1/HAL 12 Way Single Adjustable Shocks
This is a VERY close to new set of QA1/HAL 12 way adjustable shocks for 4th Gen F-Bodies. These were installed on the car in summer of 2012 and the car was literally driven only a handful of times, once at the track for 6 or 7 passes, and one road trip to where it hasn't moved since in Jan of 2013. Car is being parted.
These literally may have 600-700 miles on them TOPS, 450 of which was the trip from PA to IN when we moved in Jan of 13. Car has not moved since January 9th of 2013 and has been on jackstands since then.
The dirt you're seeing in the threads of the fronts is anti-sieze. I coated the whole things. Wiped as much off as I could get to without going to a brush in the threads. Corrosion on the bottoms of the fronts and rear mounting hardware is just normal road grime. There's not a dent or issue with them at all.
ALSO INCLUDED are BMR Spring Seats, and MOOG Mounts and Insulators that were installed at the same time. Spanner wrenches are included, and the washer setup was upgraded to the thrust bearings.
NEW this setup with everything included would total up to be right at $850 when you include the moog mounts and isolators, spanners, thrust bearings, and BMR seats. $675 is a good deal considering how low mileage they are. Let the pics speak for themselves.
These literally may have 600-700 miles on them TOPS, 450 of which was the trip from PA to IN when we moved in Jan of 13. Car has not moved since January 9th of 2013 and has been on jackstands since then.
The dirt you're seeing in the threads of the fronts is anti-sieze. I coated the whole things. Wiped as much off as I could get to without going to a brush in the threads. Corrosion on the bottoms of the fronts and rear mounting hardware is just normal road grime. There's not a dent or issue with them at all.
ALSO INCLUDED are BMR Spring Seats, and MOOG Mounts and Insulators that were installed at the same time. Spanner wrenches are included, and the washer setup was upgraded to the thrust bearings.
NEW this setup with everything included would total up to be right at $850 when you include the moog mounts and isolators, spanners, thrust bearings, and BMR seats. $675 is a good deal considering how low mileage they are. Let the pics speak for themselves.
Thread
Thread Starter
Forum
Replies
Last Post
karpetcm
Parts For Sale
2
12-16-2015 09:07 PM