Powder coated LS1 front,LT1 rear brakes-Baer,Hawk,Russel...
Thread Starter
Registered User
Joined: Aug 2002
Posts: 982
From: Berks County PA
Powder coated LS1 front,LT1 rear brakes-Baer,Hawk,Russel...
The pads and rotors alone cost almost $900., and those parts only have 600 miles...zero issues. I'm 99% certain that the calipers also have the Speed Bleeders already installed.
FRONT
02 LS1 Front Calipers/Spindles from an 02 TA w/ 1,200 miles - powder coated, calipers completely rebuilt w/ all new parts when coated a few years ago (<15K miles ago), FORMULA decals by Brent (will peel right off), Russel brake braided stainless hose on each caliper (~600 miles)
Baer DecelaRotors LS1 front rotors & Hawk Ceramic pads - very little wear, ~600 miles, followed directions from Baer about seasoning new rotors/pads, Rotors-$336 Pads-$100 shipped new.
REAR
Baer DecelaRotors & Hawk Ceramic pads - from a 93, very little wear, ~600 miles, followed Baer directions about seaoning new rotors/pads, Rotors-$355 Pads-$82 shipped new.
PRICE REDUCED
$500 picked up
$600 delivered
Add 3.5% if using Paypal.
FRONT
02 LS1 Front Calipers/Spindles from an 02 TA w/ 1,200 miles - powder coated, calipers completely rebuilt w/ all new parts when coated a few years ago (<15K miles ago), FORMULA decals by Brent (will peel right off), Russel brake braided stainless hose on each caliper (~600 miles)
Baer DecelaRotors LS1 front rotors & Hawk Ceramic pads - very little wear, ~600 miles, followed directions from Baer about seasoning new rotors/pads, Rotors-$336 Pads-$100 shipped new.
REAR
Baer DecelaRotors & Hawk Ceramic pads - from a 93, very little wear, ~600 miles, followed Baer directions about seaoning new rotors/pads, Rotors-$355 Pads-$82 shipped new.
PRICE REDUCED
$500 picked up
$600 delivered
Add 3.5% if using Paypal.
Last edited by Mr.Whitey; May 30, 2009 at 08:14 PM.
Registered User
Joined: Apr 2002
Posts: 537
From: Pittsburgh, PA
I might be in the market for some of these pieces later this week. If this happens, would you be willing to sell some of this stuff piece-meal? Specifically, I am interested in the spindles, calipers, caliper mounting brackets, guide pins/boot and brake lines (they appear to be SS).
At this point, I am just checking. Regardless, good luck with the sale. It looks like nice stuff.
At this point, I am just checking. Regardless, good luck with the sale. It looks like nice stuff.
Thread Starter
Registered User
Joined: Aug 2002
Posts: 982
From: Berks County PA
I might be in the market for some of these pieces later this week. If this happens, would you be willing to sell some of this stuff piece-meal? Specifically, I am interested in the spindles, calipers, caliper mounting brackets, guide pins/boot and brake lines (they appear to be SS).
At this point, I am just checking. Regardless, good luck with the sale. It looks like nice stuff.
At this point, I am just checking. Regardless, good luck with the sale. It looks like nice stuff.
Thread
Thread Starter
Forum
Replies
Last Post
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM