ported and welded LT intake
06-24-2011, 12:52 PM
#1
Registered User
Thread Starter
Join Date: Oct 2002
Location: Nashville
Posts: 255
ported and welded LT intake
This is an intake I modified and ported to match afr 227 heads but I've also used them on LT 4 heads with great results. See here http://www.popularhotrodding.com/tec...ams/index.html
Comes with fuel rail that has -8 inlet/outlet and a -6 crossover. Ported to work with 58mm throttle body. EGR crap cut off and welded up. Yes it fits under a stock cowl and hood. The notch up front added later was to clear a Nitrous Works plate setup.
$200 plus shipping.
Comes with fuel rail that has -8 inlet/outlet and a -6 crossover. Ported to work with 58mm throttle body. EGR crap cut off and welded up. Yes it fits under a stock cowl and hood. The notch up front added later was to clear a Nitrous Works plate setup.
$200 plus shipping.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
squarehead
General 1967-2002 F-Body Tech
0
11-21-2014 08:02 PM