Ported LT4 heads & Intake
Thread Starter
Registered User
Joined: Feb 2001
Posts: 3,068
From: Cincinnati, Ohio
Ported LT4 heads & Intake
I have a set of LT4 heads, and lt4 intake. New valve seals. Stock LT4 valves
They have been HEAVILY ported, the ports are very large and need work to make good power. One of the ports was ported through where the push rod comes through the head on the intake wall and was welded, but needs to be reported. Buyer may also want to weld up the runners a little to try and get the runner size smaller.
The original owner also went through the casting wall where the rocker stud screws in, and those areas were filled with epoxy.
On a boost application, it may work as is. I am trying to be as honest as i can about these heads. Any questions please ask.
I dont have flow numbers, and i dont know who ported them. One of those things i just happened to come across locally and pick them up.
Once again, these ARE NOT bolt on and run. They need welding and port work to get them into ideal shape. Im pretty sure they arent warped (dont look like they have ever been run, have some lube on the top of head but thats it). I put a level on them and they looked good to me, but never had them on a mill table
The intake is no longer Red, but powdercoated a chrome color. It is opened up for a 58mm TB. The injector areas was ported through in porting and welded up. Most of the welds have been reported back out, but i think in 1 spot it needs to be cleaned up. Powercoating covers all welds.
I will sell heads/intake/valves seperately, but must sell heads first before i break apart the valves and intake.
Make an offer, i just need to get these out of my garage quickly and pay off my x mas credit card bills.
Lots of pictures...
http://home.cinci.rr.com/atljar/My%20Heads/
They have been HEAVILY ported, the ports are very large and need work to make good power. One of the ports was ported through where the push rod comes through the head on the intake wall and was welded, but needs to be reported. Buyer may also want to weld up the runners a little to try and get the runner size smaller.
The original owner also went through the casting wall where the rocker stud screws in, and those areas were filled with epoxy.
On a boost application, it may work as is. I am trying to be as honest as i can about these heads. Any questions please ask.
I dont have flow numbers, and i dont know who ported them. One of those things i just happened to come across locally and pick them up.
Once again, these ARE NOT bolt on and run. They need welding and port work to get them into ideal shape. Im pretty sure they arent warped (dont look like they have ever been run, have some lube on the top of head but thats it). I put a level on them and they looked good to me, but never had them on a mill table
The intake is no longer Red, but powdercoated a chrome color. It is opened up for a 58mm TB. The injector areas was ported through in porting and welded up. Most of the welds have been reported back out, but i think in 1 spot it needs to be cleaned up. Powercoating covers all welds.
I will sell heads/intake/valves seperately, but must sell heads first before i break apart the valves and intake.
Make an offer, i just need to get these out of my garage quickly and pay off my x mas credit card bills.
Lots of pictures...
http://home.cinci.rr.com/atljar/My%20Heads/
Thread Starter
Registered User
Joined: Feb 2001
Posts: 3,068
From: Cincinnati, Ohio
Sent you mail.
So i dont have a flock of emails heading my way asking for a price, i would perfer people make an offer rather than ask for price.
I really havent seen anything like this for sale before, so dont want to name a price. Dont be afraid to lowball (within reason, im not dumb), it wont offend me. More than willing to talk with potential buyers and negotiate
So i dont have a flock of emails heading my way asking for a price, i would perfer people make an offer rather than ask for price.
I really havent seen anything like this for sale before, so dont want to name a price. Dont be afraid to lowball (within reason, im not dumb), it wont offend me. More than willing to talk with potential buyers and negotiate
Registered User
Joined: Dec 2001
Posts: 808
From: Peachtree City, GA
Good luck selling these jared...Jared is a great guy tells you how it is straight up, doesnt beat around the bush, and very informative
. Will do business with him again. And again good luck...here is a TTT for you.
thanks
matt
. Will do business with him again. And again good luck...here is a TTT for you.thanks
matt
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
95chwagon
Parts For Sale
4
Jan 13, 2015 09:19 PM