Ported LT1 Trick Flow Heads. These were ported by Mike Stark at CFM.
I don't have the flow sheet, but was approx 300cfm at .650" lift and 220cfm exh at .600" lift. They are used, but in great shape. I'll take $1100 shipped in the 48 states for them or $1000 if you pick them up. SALE IS PENDING!

Procharger D1SC for LT1, includes 12 rib belt and additional pulleys. $3000 shipped.

58mm BBK TB $175 shipped. SOLD!!

LT1 intake port matched and equipped with N2O spray bar. The intake has been ceramic coated. Includes jet chart and jets and solenoids. $450 shipped.

The Nitrous Works plate for 58mm TB. $100 shipped. SALE PENDING!

Crane 1.6 Rockers $150 shipped

Splayed cap LT1 block with a 1/2 fill 4.030 bore (2 pc RMS). $500 SALE PENDING!

Eagle 3.48 stroke forged crank (2 pc RMS). $400 shipped.

Eagle 6" H-Beam rods $300 shipped.

JE flattop pistons (#7 is scorced) (I have the part #) $200 shipped.

ATI LT1 balancer $150 SOLD!

SFI approved Flexplate $50

The rotating assembly is internally balanced. I'll sell the entire assembly with ATI LT1 balancer and SFI flexplate for $1000 shipped.

Comp Cams Custom Blower Hyd Roller Cam. The cam is 236/248 dur @ .050", .625/.600 lift (with 1.6:1 rockers) and 114 LS. $140 shipped

AFR Rev Kit $100 shipped

CSI Water Pump w/ LT1 housing $140 shipped

LT1 stock oil pan $30 shipped

Alky Control Dual nozzle kit with cast alum LT1 elbow $450 shipped. SALE PENDING!

FAST ECU w/ WB O2 sensor (setup for LT1) also includes connection cable and software disk (no wiring harness)$650 shipped.

Late model Opti Spark w/ MSD cap and rotor $200 shipped

Late model LT1 Timing Cover $35 shipped

LT1 crossmember for 4L80E transmission. Available Again.

 

You have some mails

 

pm sent for throttle body

 

any idea what a harness would run for that ecu?

 

I'm not sure how much a complete harness is, but Casper's Electronics sells the pigtail kit for $50. It would have to be wired into your factory harness.

http://www.casperselectronics.com/mm...ode=XFIDFIFAST

 

sent pm on the heads. I'll take them and maybe the intake if it is ported to match the heads?

 

RRR,
PM'd you back on the heads and intake. Thanks.

 

Kevin, paypal sent to you on the balancer.

Thanks

 

I checked on the wiring harness to go with the Classic FAST box. It's $292. If anyone is interested, I'll get a harness and sell the complete FAST system for $900 shipped!
Thanks.
Kevin

 

Interested in the opti. Is it a true MSD opti or just a cap and rotor setup? How many miles are on it? It is a vented style 95-97'?

Jon

 

I'll take the opti if I havent been beat to it yet.
Aaron Reel
areel@centurytel.net

 

Hi,
It's just an MSD cap on a GM Opti. Sorry for the confusion.

 

Still have the Procharger, the FAST system, N2O intake and the short block for sale.

 

How much run time on the CSI water pump?
which series/part # rockers are they?

Thanks

 

Which FAST system is that?? XFI by chance??? Please?? (fingers crossed)