VINCELEE123

Ive got some ported LT1 heads with 4K on them, ported by greg at GTP, stock size ferrea stainless steel valves, undercut with 5 angle valve job, 600" lift dual coil crane valve springs. ready to bolt on, no flow numbers, car ran 12.01@112 with th350 2800 convertor, 224/236 cam and 3.42 gears, no weight reduction
800+shipping. got pics if needed.


ok, i got some 24lb svo injectors with 4K on them, first 100$ shipped firm.

Ive got some 1.5 Lunati NSA anadiozed blue roller rockers, and will include polylocks 125$ shipped firm.

I also have a stock tb with a slp air foil installed in it, great condition 50$ shipped firm.

I have can get pics of all items

Vince

VINCELEE123

i will include polylocks with rockers

Vince

VINCELEE123

ttt

madwolf

Can you give me the numbers off those injectors? Any pictures of them? I'll buy them if I get a good answer for the above questions.....

PS. Never got the PCM or the HPP...

VINCELEE123

finnaly figured out my combo, i can get pics today and numbers today, if you buyem, ill ship the pcms,progammer and injectors all at once.

Vince

madwolf

Sounds good. I just want to make sure they're SVOs. I've bought "SVO"'s off this board before and they turned out to be Bosch 19lb/hr injectors with blue tops when I got them...

VINCELEE123

what color are the svo's? mine are a green/blue color.
ill give you the number on them when i get home.

madwolf

SVOs have blue tops, but there are other Bosch injectors with blue tops as well, so the number is the only way to tell.

bowtieforpower

could i put those heads on a almost stock engine? also, is your price firm?

VINCELEE123

Yes, ive got a little room to work with on the heads, just not much. if i had flow numbers, these heads could sell for more.

like i said 112mph with a nitrous cam 114lobe 3.42 gears and 3650lb car, so i know they make power.

as far as stock cam, i would make more power. think about a vortec motor. there cam is similar and people put ported heads on them and they pick up power, of course headers would help

Vince

S.J.S.

Hey vince ported and polished right? But everything else is stocksized?

VINCELEE123

yes, ported heads, ferrea valves with a 5 angle valve job!
600" lift crane springs. The heads are ready to bolt on.
they have close to 800$ in parts and just machine work alone

2MUCHZ

Sent an email on the heads....thanks

VINCELEE123

Updated stock heads off a 95 z28, fully assmebled.
Make offers


heads might be sold to jerry(2muchz)
rockers might be gone as well

Madwolf, my dad borrowed my digital camara.
hope fully he will return it tonight, ill get the numbers to you.

could you tell me the number for a 30lb svo injector?
i might have found some and just wondering.
also where is the number on the injector?

Vince

VINCELEE123

got to many offers on the heads, i will finnaly admit that the car they came off of ran 11.0 on a 100shot!

900$ can get pics

Vince