Ported Cyl heads, Long tube headers, etc etc
09-24-2006, 09:16 PM
#1
Registered User
Thread Starter
Join Date: Jun 2005
Location: Wolcott, CT
Posts: 642
Ported Cyl heads, Long tube headers, etc etc
I need to sell these ASAP, I will accept pay pal. I am parting out my 1994 Camaro, I got a few things left over.
CNC Ported LT1 Casting cyl heads. Stock size valves. Comp Cam 918 springs with steel retainers. Perfect for that Lloyd Elliot based set up. Springs might have at best 1,000 miles.
Intake CFM
254 @ .500"
257 @ .550"
259 @ .600"
Exhaust CFM
177 @ .500"
180 @ .550"
183 @ .600"
Ask 1,000 email to blkscremainmach@hotmail.com if serious
Jet Hot Longtube headers, Coating is coming off but you can get that redone. Has emission fittings, will fit 93-97 Fbodies comes with o2 extentions and used o2 sensors.
Asking 300
New GM MAF sensor with screen still in it $100
New GM Block Knock Sensor 25$
I really want these things out of here, email if serious
blkscreaminmach@hotmail.com
CNC Ported LT1 Casting cyl heads. Stock size valves. Comp Cam 918 springs with steel retainers. Perfect for that Lloyd Elliot based set up. Springs might have at best 1,000 miles.
Intake CFM
254 @ .500"
257 @ .550"
259 @ .600"
Exhaust CFM
177 @ .500"
180 @ .550"
183 @ .600"
Ask 1,000 email to blkscremainmach@hotmail.com if serious
Jet Hot Longtube headers, Coating is coming off but you can get that redone. Has emission fittings, will fit 93-97 Fbodies comes with o2 extentions and used o2 sensors.
Asking 300
New GM MAF sensor with screen still in it $100
New GM Block Knock Sensor 25$
I really want these things out of here, email if serious
blkscreaminmach@hotmail.com
Last edited by BlackScreaminMachine; 09-26-2006 at 09:13 AM.
09-26-2006, 06:25 AM
#5
Registered User
Thread Starter
Join Date: Jun 2005
Location: Wolcott, CT
Posts: 642
Re: Ported Cyl heads, Long tube headers, etc etc
CSR Ultra Light starter.
The lightest one they make, will turn up to 12.0 to 1 motors. Mine was 11.25 to one and never had a issue. This cleared everything including LT headers with ease.
165$
The lightest one they make, will turn up to 12.0 to 1 motors. Mine was 11.25 to one and never had a issue. This cleared everything including LT headers with ease.
165$
09-26-2006, 01:12 PM
#6
Registered User
Thread Starter
Join Date: Jun 2005
Location: Wolcott, CT
Posts: 642
Re: Ported Cyl heads, Long tube headers, etc etc
I keep finding stuff here lol.
Set of Morel lifters, less then 1000 miles, with Tie bar. I had a custom ground Bret Bauer cam and I used all this stuff so for anyone with a LE setup, this is perfect and costing less then buying it new.
325$
Set of Morel lifters, less then 1000 miles, with Tie bar. I had a custom ground Bret Bauer cam and I used all this stuff so for anyone with a LE setup, this is perfect and costing less then buying it new.
325$
09-27-2006, 09:56 AM
#10
Registered User
Thread Starter
Join Date: Jun 2005
Location: Wolcott, CT
Posts: 642
Re: Ported Cyl heads, Long tube headers, etc etc
cam is gone, it was a small LE1 cam, designed for emissions. But you can email/pm bret for another one, the heads will do fine.
the y pipe is welded to my corsa and at this time I plan to keep but it was a Hooker y pipe I got through tunder racing, its not expensive + when you match it up to your cat back, there is going to be a need for adjustment.
the y pipe is welded to my corsa and at this time I plan to keep but it was a Hooker y pipe I got through tunder racing, its not expensive + when you match it up to your cat back, there is going to be a need for adjustment.
09-27-2006, 04:59 PM
#11
Registered User
Join Date: May 2006
Posts: 190
Re: Ported Cyl heads, Long tube headers, etc etc
can i get pics of the headers to xxxtreme36@comcast.net
09-28-2006, 06:18 AM
#12
Registered User
Thread Starter
Join Date: Jun 2005
Location: Wolcott, CT
Posts: 642
Re: Ported Cyl heads, Long tube headers, etc etc
I will get them to you when I am home. I est shipping to be between 50-75 depending on where you live. I est the weight to be 40 pounds + the size of the box @ http://www.usps.com my Zip is 06716
I will work with the buyer if its off a couple of bucks. I'll meet you half way.
Pay pal is blkscreaminmach@hotmail.com
I will work with the buyer if its off a couple of bucks. I'll meet you half way.
Pay pal is blkscreaminmach@hotmail.com
09-28-2006, 11:19 AM
#13
Registered User
Join Date: Sep 2006
Location: Albany, NY
Posts: 214
Re: Ported Cyl heads, Long tube headers, etc etc
Pics of headers to dcelss@yahoo.com I"m located near Albany, NY. Possibly meet half way in lieu of shipping?
09-28-2006, 11:32 AM
#14
Registered User
Thread Starter
Join Date: Jun 2005
Location: Wolcott, CT
Posts: 642
Re: Ported Cyl heads, Long tube headers, etc etc
ill get you pics tonight, if anything I might be going to LVD one of the up coming weekends..... I may be able to deliver them personally..... but who knows. If you want them we can go from there.
Its 1st come 1st serve, I have had alot of intrest but no serious buyer on them.
Its 1st come 1st serve, I have had alot of intrest but no serious buyer on them.