Plenty Of LT1 Parts (Ga)
I never post mostly just scan, and read the forum, but since I am in need of alot of parts being gone out of my way, I figured I would give it a shot, for starters I *HAD* a 95 drop top TransAm which got totalled out by a drunk driver. I still have everything from it except for the damaged parts. I am sure plenty of you could make use of the parts since I am going the LS7 route soon as they are released. I am only going to deal locally for the first 2 weeks cause I really don't want the hassle of shipping these things. I am located in Warwick, Ga. I would prefer local meet or someone to pick them up from me. After the 2 weeks if I still have parts left I will open them up to internet buyers and ship anything thats left. Everything is in really good shape otherwise I would not have listed it, the things that were damaged in the wreck were tossed, so don't worry about damaged parts. They are all mostly LT1 parts but I have a few suspension mods I believe are interchangeable to LS1's. Please email if you want any additional info at RagTopLT4TA@earthling.net, or you can get me on AIM at RagTopLTAInGA.
Hooker Ceramic Coated Long Tube Headers - Used for roughly 10k, still have the coating on them, and have hardly any scratches from the install. Asking $490
Corsa Cat-Back - Used for the same amount of time as the headers, and in the same condition. Asking $595
Arizona Speed & Marine Mono-Blade Billet Throttle Body - Used for 5k, went on with the super charger and the heads and intake. Asking $450
Vortech V-2 SQ S-Trim & Aftercooler - Was on the car for 5k, comes with everything including instructions, can't really even see that it has been installed. Asking $4800
Yank Sportsman 4L60-E and Converter - Both went in the car at the same time, and were used for a little over 8k. Neither of these have seen the track. The stall is a Super Yank 3500. I also have a few quarts of tranny fluid you can have with this as well. I did not get the tranny coller since it was under the front clip and was damaged. Both of these are in perfect shape the converter was $895 and the tranny was 1,850 I want to sell them both together. Asking $1300 for all of it.
Z06 CHROME 18x9.5 Rims - These come with no tires, have NO scratches or dents, or anything of that sort. Asking $750
I have not taken anything off of the motor yet, the original motor had 47k on it. Plus it has my cam, heads,a nd intake manifold on it. I may sell it all together for $3500 or break it up I am not sure yet, I have not listed my suspension yet, since I have to wait on the body shop to get it back to me, I don't want to list something forsale I don't have in my possession.
Hooker Ceramic Coated Long Tube Headers - Used for roughly 10k, still have the coating on them, and have hardly any scratches from the install. Asking $490
Corsa Cat-Back - Used for the same amount of time as the headers, and in the same condition. Asking $595
Arizona Speed & Marine Mono-Blade Billet Throttle Body - Used for 5k, went on with the super charger and the heads and intake. Asking $450
Vortech V-2 SQ S-Trim & Aftercooler - Was on the car for 5k, comes with everything including instructions, can't really even see that it has been installed. Asking $4800
Yank Sportsman 4L60-E and Converter - Both went in the car at the same time, and were used for a little over 8k. Neither of these have seen the track. The stall is a Super Yank 3500. I also have a few quarts of tranny fluid you can have with this as well. I did not get the tranny coller since it was under the front clip and was damaged. Both of these are in perfect shape the converter was $895 and the tranny was 1,850 I want to sell them both together. Asking $1300 for all of it.
Z06 CHROME 18x9.5 Rims - These come with no tires, have NO scratches or dents, or anything of that sort. Asking $750
I have not taken anything off of the motor yet, the original motor had 47k on it. Plus it has my cam, heads,a nd intake manifold on it. I may sell it all together for $3500 or break it up I am not sure yet, I have not listed my suspension yet, since I have to wait on the body shop to get it back to me, I don't want to list something forsale I don't have in my possession.
Re: Plenty Of LT1 Parts (Ga)
Ben383 - Sorry can't break the kit apart, sale is pending on it as well.
thrift23 - I missed your post sorry, no I don't have any frontend parts, what I have listed is what I have.
green94camaro7 - It was sold with the headers
Rob Langley - Nope what I have listed is what I have forsale.
bdc95ta - yes it is premium tips, sale is pending on it but I can still send some pics incase the deal does not go thru. PM Me your email please.
97Z-pimp - Rims were sold today, buyer picked them up about 30 minutes ago.
ENGINE IS SOLD ALSO
thrift23 - I missed your post sorry, no I don't have any frontend parts, what I have listed is what I have.
green94camaro7 - It was sold with the headers
Rob Langley - Nope what I have listed is what I have forsale.
bdc95ta - yes it is premium tips, sale is pending on it but I can still send some pics incase the deal does not go thru. PM Me your email please.
97Z-pimp - Rims were sold today, buyer picked them up about 30 minutes ago.
ENGINE IS SOLD ALSO
Re: Plenty Of LT1 Parts (Ga)
Originally Posted by magius231
if you can separate the motor, I need the ICM/coil assembly if available. I'm in SC though so I guess let me know in two weeks...
Sorry the engine is already sold.
Re: Plenty Of LT1 Parts (Ga)
The exhaust has been sold already yes, the tranny and the TC are still up though. I did not get my suspension parts back from the body shop, I had a few people asking about that. I am guessing they thought they needed them more than I?
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
Feb 9, 2016 09:21 PM
CamaroRSguy
Automotive News / Industry / Future Vehicle Discussion
12
Jul 8, 2002 09:39 PM



