Parting out complete car
#1
Parting out complete car
I'm parting out my complete car. 93 trans am with a 2002 WS6 conversion done to it. Everything is in great shape all body parts are Gm. Engine, trans, and wiring harness are for sale. the harness, computer , and trans are 95 model
engine
396 Ci stroker I'll sell complete or will seperate
Dragon slayer 396 crank
Eagle H-beam 6.0 rods
JE pistons 9.1 compresson with 64cc heads
AFR 220 heads compete with race porting from AFR
LT4 Intake Brand new GM
Delteq opti direct sys
Lt4 carbon deposit valve cover brand new GM
scorpon 1.7 RR's
60lb holley injectors
brand new AC delco Opti
Brand new AC delco Water pump
Tranny
Gm rebuilt trans 4L60E less than 3K miles
Front clip
All new parts were used less than 3 months old
Driver and pass fender
front bumper cover 02 ws6
Fog lights
turn signals
headlight assy's both sides complete
Ws6 hood bought this broken and had it fixed looks great
interior
Complete setup frm a wrecked 2002 firebird graphite grey cloth seats , carpet, and all panels. This was removed from a 9K wreck everything looks new
looking to sell the big stuff before I start parting the complete car. I will sell the car complete as it sits with the prochager and weld wheels for $8,500, and that just covers the cost of the engine. everything is best offer if I part it out but I'm onlygoing to part it if the big stuff sells first.
engine
396 Ci stroker I'll sell complete or will seperate
Dragon slayer 396 crank
Eagle H-beam 6.0 rods
JE pistons 9.1 compresson with 64cc heads
AFR 220 heads compete with race porting from AFR
LT4 Intake Brand new GM
Delteq opti direct sys
Lt4 carbon deposit valve cover brand new GM
scorpon 1.7 RR's
60lb holley injectors
brand new AC delco Opti
Brand new AC delco Water pump
Tranny
Gm rebuilt trans 4L60E less than 3K miles
Front clip
All new parts were used less than 3 months old
Driver and pass fender
front bumper cover 02 ws6
Fog lights
turn signals
headlight assy's both sides complete
Ws6 hood bought this broken and had it fixed looks great
interior
Complete setup frm a wrecked 2002 firebird graphite grey cloth seats , carpet, and all panels. This was removed from a 9K wreck everything looks new
looking to sell the big stuff before I start parting the complete car. I will sell the car complete as it sits with the prochager and weld wheels for $8,500, and that just covers the cost of the engine. everything is best offer if I part it out but I'm onlygoing to part it if the big stuff sells first.
#12
Re: Parting out complete car
LT1 and LS1
I'll take $400 for the hood + shipping
MyShibbyZ28
They are non self , they are also 7/16 studs, I'll let them go studs, plates, rockers, and locks for $200
solid95z
I'll let the short block go for $2K Its a 4 bolt main from a 96 vette
I'll let it go just like it sits in the car right now minus the supercharger for $5500.
I'll take $400 for the hood + shipping
MyShibbyZ28
They are non self , they are also 7/16 studs, I'll let them go studs, plates, rockers, and locks for $200
solid95z
I'll let the short block go for $2K Its a 4 bolt main from a 96 vette
I'll let it go just like it sits in the car right now minus the supercharger for $5500.
Last edited by philcam01; 10-15-2006 at 08:40 AM.