Parting out Car....
#1
Parting out Car....
Ok first of all I want to state I have decided to part the car out only if the engine sells first.
Here is the breakdown and please do not try and low-ball me because the prices below are set.
Package #1 - Rolling Chassis - Will not be parted out so please do not ask.
93 Camaro - Rolling Chassis - Currently the body has approximately 75K miles on it. The car has been hit from behind (fixed) and also the front bumper has been replaced. The mouth of the bumper has been cut to allow airflow to the intercooler (not included).
- Moser 9 inch - powdercoated black - Aluminum center section with Detroit Locker (3.50 gear). Also has a back brace welded on. (less than 500 miles on the rearend)
- RK Sport Ajustable Shocks
-Powerslot rotors and performance friction pads
-Spohn Sway Bar
-Spohn Panhard Bar
-Spohn adjustable LCA's
-Twin Intank Fuel pump
-SLP Subframe Connectors
I am asking $3500 for the above.
Package 2 - Engine - Will not be parted out so please do not ask.
- Engine Package includes:
Engine has approximately (1500 miles on it)
383 stroker (9.5:1 compression)
Cola Crank
Oliver I-beam Rods
JE -31cc piston
4-bolt mains
CC224/236 cam on a 113ls
CNC LT1 ported heads (heads were decked to get desired compression)
93 intake manifold
Cloyes Double Roller Chain
Hardened pushrods
1.6 Crane Gold roller rockers
This motor was designed for a supercharger
I am asking $4500.00 .
Package 3 - Supercharger Kit - - Will not be parted out so please do not ask.
-ATI F1 supercharger which has been freshly rebuilt - 0 miles on it.
-SD Concepts Spring loaded tensioner
-Spearco Front Mount intercooler with intercooler pipes that have been Jet Hot Coated.
-12-rib crank and blower pulley
-ATI Race Bypass Valve with Trick Flow elbow
-Includes ever t-bolt clamp and hoses needed to complete this kit.
I am asking $4500.00.
-Arizona Speed & Marine TB ($250.00) - designed for a 93 Camaro
-Spohn Torque Arm - $300.00
-Spohn Heavy Duty Driveshaft - $225.00
-Bogart Bolted RT Wheels - $1400.00. This will include Morroso tires in the front and MT 28x10.5x15 ET Drags in the rear. The setup has 2 passes on it. Also it is important to note that the front tires have been burnt a little after locking the brakes up at the track. Fits both LT1 and LS1 cars.
- Neil Chance Convertor - Brand New - designed for a TH400 - 4300 stall. This is a welded convertor - $800.00
- FAST System with Fasttrackperformance piggyback harness - $1300.00
- 83 lb fuel injectors - $400.00
- LTCC box will include LS1 coil packs, precut sparkplug wires and modified stock valve covers - $600.00
- Hooker Long tubes and y-pipe are currently sold but if something changes I will let you know.
- ATR Catback exhaust - $325.00
- Autometer Boost and Fuel Pressure Gage - $150.00
- Autometer Tach w/ Shift light - $100.00
- Be Cool Radiator and Spal Fan - $350.00
- CSI Electric waterpump with stock waterpump housing - $120.00
***non of the parts include shipping charges*********
I will let the whole car go for 13,500 which will include everthing listed.
Pics can be seen at : http://68.41.224.19/jasonc/art/
If anyone has any questions please feel free to pm or email me. Thanks
Here is the breakdown and please do not try and low-ball me because the prices below are set.
Package #1 - Rolling Chassis - Will not be parted out so please do not ask.
93 Camaro - Rolling Chassis - Currently the body has approximately 75K miles on it. The car has been hit from behind (fixed) and also the front bumper has been replaced. The mouth of the bumper has been cut to allow airflow to the intercooler (not included).
- Moser 9 inch - powdercoated black - Aluminum center section with Detroit Locker (3.50 gear). Also has a back brace welded on. (less than 500 miles on the rearend)
- RK Sport Ajustable Shocks
-Powerslot rotors and performance friction pads
-Spohn Sway Bar
-Spohn Panhard Bar
-Spohn adjustable LCA's
-Twin Intank Fuel pump
-SLP Subframe Connectors
I am asking $3500 for the above.
Package 2 - Engine - Will not be parted out so please do not ask.
- Engine Package includes:
Engine has approximately (1500 miles on it)
383 stroker (9.5:1 compression)
Cola Crank
Oliver I-beam Rods
JE -31cc piston
4-bolt mains
CC224/236 cam on a 113ls
CNC LT1 ported heads (heads were decked to get desired compression)
93 intake manifold
Cloyes Double Roller Chain
Hardened pushrods
1.6 Crane Gold roller rockers
This motor was designed for a supercharger
I am asking $4500.00 .
Package 3 - Supercharger Kit - - Will not be parted out so please do not ask.
-ATI F1 supercharger which has been freshly rebuilt - 0 miles on it.
-SD Concepts Spring loaded tensioner
-Spearco Front Mount intercooler with intercooler pipes that have been Jet Hot Coated.
-12-rib crank and blower pulley
-ATI Race Bypass Valve with Trick Flow elbow
-Includes ever t-bolt clamp and hoses needed to complete this kit.
I am asking $4500.00.
-Arizona Speed & Marine TB ($250.00) - designed for a 93 Camaro
-Spohn Torque Arm - $300.00
-Spohn Heavy Duty Driveshaft - $225.00
-Bogart Bolted RT Wheels - $1400.00. This will include Morroso tires in the front and MT 28x10.5x15 ET Drags in the rear. The setup has 2 passes on it. Also it is important to note that the front tires have been burnt a little after locking the brakes up at the track. Fits both LT1 and LS1 cars.
- Neil Chance Convertor - Brand New - designed for a TH400 - 4300 stall. This is a welded convertor - $800.00
- FAST System with Fasttrackperformance piggyback harness - $1300.00
- 83 lb fuel injectors - $400.00
- LTCC box will include LS1 coil packs, precut sparkplug wires and modified stock valve covers - $600.00
- Hooker Long tubes and y-pipe are currently sold but if something changes I will let you know.
- ATR Catback exhaust - $325.00
- Autometer Boost and Fuel Pressure Gage - $150.00
- Autometer Tach w/ Shift light - $100.00
- Be Cool Radiator and Spal Fan - $350.00
- CSI Electric waterpump with stock waterpump housing - $120.00
***non of the parts include shipping charges*********
I will let the whole car go for 13,500 which will include everthing listed.
Pics can be seen at : http://68.41.224.19/jasonc/art/
If anyone has any questions please feel free to pm or email me. Thanks
Last edited by IDOXLR8; 10-11-2004 at 09:06 AM.
#3
Re: Parting out Car....
I need the 4 rubber stoppers that space the hood (if they are not dry rotted)
I also need the 3 pins that go under the bumper to hold it up. They are those frustrating plastic pin type things and I forgot to reinstall mine after my last project
I was thinking $6 shipped to Austin (78705)
Thanks,
~Matt
I also need the 3 pins that go under the bumper to hold it up. They are those frustrating plastic pin type things and I forgot to reinstall mine after my last project
I was thinking $6 shipped to Austin (78705)
Thanks,
~Matt
#6
Re: Parting out Car....
Originally Posted by xmatt
I need the 4 rubber stoppers that space the hood (if they are not dry rotted)
I also need the 3 pins that go under the bumper to hold it up. They are those frustrating plastic pin type things and I forgot to reinstall mine after my last project
I was thinking $6 shipped to Austin (78705)
Thanks,
~Matt
I also need the 3 pins that go under the bumper to hold it up. They are those frustrating plastic pin type things and I forgot to reinstall mine after my last project
I was thinking $6 shipped to Austin (78705)
Thanks,
~Matt
#7
Re: Parting out Car....
Originally Posted by 95z383lt4
I'm interested in the Autometer Boost and Fuel Pressure Gage - $150.00. Are they both electric? Do you have pods too?
The fuel pressure gage is electric and the boost gage is mechanical. Yes I do have a pod which is not included. I will let all three go for 165.00 plus shipping.
******Also I would like to remind everyone that I am waiting for the motor to sell first before parting the car out******
#15
Re: Parting out Car....
Ok I have decided to let the whole car go with 13.5K complete. This car will sell as is. The only issues with the car is that the speedo does not work and the battery voltage reads low on the gauge. The car will also need to be retuned since I switched from a twin intercooler setup to a Spearco front mount intercooler. Also the car will sell as is. Below are some pics of what you will get.
http://68.41.224.19/jasonc/art/
http://68.41.224.19/jasonc/art/