parting out 97 z28, leather, charcoal int, black ext., auto
07-12-2007, 10:03 PM
#1
Registered User
Thread Starter
Join Date: Jul 2002
Location: Burlington, NJ
Posts: 1,367
parting out 97 z28, leather, charcoal int, black ext., auto
ALL COMPONENTS ARE CHARCOAL. CAME FROM A 97 AUTO CAMARO
NO PARTS HAVE CRACKS OR SCRATCHES (leather has a few creases and wear marks and console has seat belts scratches)
1: interior panels, all but hatch…$75
2: leather interior option: seats and door panels, switches included…........SOLD
3: dash pad, dash, console for auto, and air bag assy…$750
4: head liner…no rips, tears, burn marks…............................................ ..SOLD
Any other interior parts, make an offer. I have available mirrors, panels, glass, hatch, hood, shifter and anything else form an interior…body panels also available as well. hit me up on email or PM
Make an offer on priced stuff too, I’m flexible…this is just what I’m assuming it’s worth. Soon I’ll have a plethora of suspension, braking and drive components as well…just not there yet. But if you want something here’s my upgrades and I’ll get them out as soon as possible.
Suspension/Brakes/Wheels:
Hal QA1 shocks w/ front 325lb springs: $450
SLP strut tower brace: $40
Aluminum rear control arms (DA-rod end and bushing combo): $75
Aluminum panhard rod (DA-rod ends):............................................ ................SOLD
Front upper control arms, del-alum chromoly steel tube: ..................................SOLD
Front Corvette 13” Z06 calipers w/ Brembo rotors & hawk HPS pads: $600, including bearings and knuckle
16" chrome 5-stars from 97-98 cars, new rubber (dont know brand but stock size):..............SOLD
TorSen rear differential w/ 3.23 gear (LS1 rear) 98+ rear brakes, 12”: ............................SOLD
auto trans, fresh rebuild and 2800 stall TC: $700 (or 500 and swap me your old one)
email is: severous01@yahoo.com
i've sold stuff and bought stuff here with no complaints...pix on request---
NO PARTS HAVE CRACKS OR SCRATCHES (leather has a few creases and wear marks and console has seat belts scratches)
1: interior panels, all but hatch…$75
2: leather interior option: seats and door panels, switches included…........SOLD
3: dash pad, dash, console for auto, and air bag assy…$750
4: head liner…no rips, tears, burn marks…............................................ ..SOLD
Any other interior parts, make an offer. I have available mirrors, panels, glass, hatch, hood, shifter and anything else form an interior…body panels also available as well. hit me up on email or PM
Make an offer on priced stuff too, I’m flexible…this is just what I’m assuming it’s worth. Soon I’ll have a plethora of suspension, braking and drive components as well…just not there yet. But if you want something here’s my upgrades and I’ll get them out as soon as possible.
Suspension/Brakes/Wheels:
Hal QA1 shocks w/ front 325lb springs: $450
SLP strut tower brace: $40
Aluminum rear control arms (DA-rod end and bushing combo): $75
Aluminum panhard rod (DA-rod ends):............................................ ................SOLD
Front upper control arms, del-alum chromoly steel tube: ..................................SOLD
Front Corvette 13” Z06 calipers w/ Brembo rotors & hawk HPS pads: $600, including bearings and knuckle
16" chrome 5-stars from 97-98 cars, new rubber (dont know brand but stock size):..............SOLD
TorSen rear differential w/ 3.23 gear (LS1 rear) 98+ rear brakes, 12”: ............................SOLD
auto trans, fresh rebuild and 2800 stall TC: $700 (or 500 and swap me your old one)
email is: severous01@yahoo.com
i've sold stuff and bought stuff here with no complaints...pix on request---
Last edited by Severous01; 07-30-2007 at 06:53 PM. Reason: LISTED SOLD ITEMS, EDITED PRICES
07-12-2007, 10:06 PM
#2
Registered User
Join Date: Jun 2006
Posts: 222
Whats your price on the front nose and drivers side fender shipped to 60431. Will paypal tonight if you gimme a good enough deal. If you make your own boxes out of several boxes and pack them VERY well it wont cost much to ship i wouldnt think not THAT heavy and your prices are good enough on those id like the rear bumper too please. ASAP x100
also, lol if you can hook me up ill take the sensor in the gas tank that reads the fuel level and sends it to the gauge, and id love the vehicle speed sensor thats located on the passenger side of the tranny.
also, lol if you can hook me up ill take the sensor in the gas tank that reads the fuel level and sends it to the gauge, and id love the vehicle speed sensor thats located on the passenger side of the tranny.
Last edited by 95 camaro z28; 07-12-2007 at 10:08 PM.
07-12-2007, 11:01 PM
#4
Registered User
Join Date: Mar 2003
Location: Columbus, Ohio
Posts: 297
Can I get some pix please?
Seriously interested in the panhard bar if it's adjustable. I'll take it, if that's what DA means. I need an adjustable one. I would also like a pic of the passenger side front fender and the head liner. Please send pix to finchinater@hotmail.com .
figure a shipping quote for said items to 43147 please
figure a shipping quote for said items to 43147 please
07-15-2007, 03:43 AM
#8
Registered User
Join Date: May 2006
Posts: 15
are those seats Ebony? are you willing to seperate the back from the front? looking for the back seats only. can you send pics to joseph.hendrickson@tq.mnf-wiraq.usmc.mil
thanks.
thanks.
07-15-2007, 11:15 AM
#9
Registered User
Join Date: Jan 2005
Location: Bullhead City, AZ
Posts: 683
Interested in the lower control arms and the Panhard rod. Can you send pics to : Gentner_Z28@hotmail.com
Or you can just PM them to me. If they are the right ones, I can paypal right away.
Or you can just PM them to me. If they are the right ones, I can paypal right away.
07-15-2007, 11:59 AM
#10
Registered User
Join Date: May 2007
Posts: 87
07-15-2007, 01:34 PM
#11
Registered User
Thread Starter
Join Date: Jul 2002
Location: Burlington, NJ
Posts: 1,367
Interested in the lower control arms and the Panhard rod. Can you send pics to : Gentner_Z28@hotmail.com
Or you can just PM them to me. If they are the right ones, I can paypal right away.
Or you can just PM them to me. If they are the right ones, I can paypal right away.
the control arms are aluminum rod and rod ends/bushings. home made, i dont know what you're talking about being 'the right ones' but they're the right ones for camaros from 81-2002...so, if you want them let me know. when i can get the suspension off the car i'll hit you back up. as of now, i have to leave it a roller because the shop it's in moves it every now and then. when i get access to a flatbed i'll rip it all out and ditch the shell.
07-15-2007, 07:34 PM
#15
Registered User
Thread Starter
Join Date: Jul 2002
Location: Burlington, NJ
Posts: 1,367
sgt...you dont read too well...the first line says everything is charcoal...not ebony...
i can do 50 plus shipping for the brace, it's heavy and long....will probably be around 15 for shipping. havent looked into it yet, but if you want to i'm in 08610 for all shipping prices.
i have the uppers, bushings included, no ball joints. joints are 30 a piece for replacements, or 50 a piece for MOOG units, which is what i would suggest.
i can do 50 plus shipping for the brace, it's heavy and long....will probably be around 15 for shipping. havent looked into it yet, but if you want to i'm in 08610 for all shipping prices.
i have the uppers, bushings included, no ball joints. joints are 30 a piece for replacements, or 50 a piece for MOOG units, which is what i would suggest.