Parting out 95 Z28
05-14-2013, 07:16 PM
#1
Registered User
Thread Starter
Join Date: Mar 2008
Location: Pittsburgh, PA
Posts: 231
Parting out 95 Z28
Parting out a Patriot Red 95 z28. It was a Manual, but the gearbox/shortblock are spoken for.
Harness, Flywheel, petals, aftermarket clutch, and bell housing - 200 obo
Golen Bowl ported Aluminum Lt1 heads with 2.00/1.56 valves and Beehive springs. Each head has a valvecover bolt broken in it 300
Summit 1.6 roller rockers with Guide plates and studs 150.
Comp Cams 7.250" push rods - 65
Shorty Headers with Custom 2.5" stainless" exhaust over the axle - 200
V8 subframe-150
Forged Aluminum Hickock Fullhouse wheels. Very Light and strong. 17x9 front and 18x10 rear. Painted black because chrome was peeling, missing 2 caps obo. I Can have them stripped of paint/ chrome for an additional fee. 650 obo.
Have a whole car, PM FOR REQUESTS.
Harness, Flywheel, petals, aftermarket clutch, and bell housing - 200 obo
Golen Bowl ported Aluminum Lt1 heads with 2.00/1.56 valves and Beehive springs. Each head has a valvecover bolt broken in it 300
Summit 1.6 roller rockers with Guide plates and studs 150.
Comp Cams 7.250" push rods - 65
Shorty Headers with Custom 2.5" stainless" exhaust over the axle - 200
V8 subframe-150
Forged Aluminum Hickock Fullhouse wheels. Very Light and strong. 17x9 front and 18x10 rear. Painted black because chrome was peeling, missing 2 caps obo. I Can have them stripped of paint/ chrome for an additional fee. 650 obo.
Have a whole car, PM FOR REQUESTS.
Last edited by xxteenobesexx; 06-03-2013 at 06:18 PM.
05-20-2013, 02:31 PM
#3
Registered User
Join Date: Mar 2012
Posts: 44
Re: Parting out 95 Z28
Is the driverside fender in good condition? I don't care about paint but it has to be almost perfect otherwise. No cracks or anything.
I'm also looking for the lid and hinge for the center console. My interior is black.
I'm also looking for the lid and hinge for the center console. My interior is black.
05-23-2013, 08:32 PM
#4
Registered User
Join Date: Mar 2010
Location: Eagle, Nebraska
Posts: 119
Re: Parting out 95 Z28
Just a quick question with the harness. There are 2 connectors for the ignition switch (is on top of the steering column about mid-way between the steering wheel and firewall), should be a black and blue one. I was wondering if you are willing to part those out (with at least 6 inches of wire behind connector)? If so list a price and a shipping to 68347.
Thanks
Thanks
Tan interior plastics. No cracks, ok shape 80 plus shipping
fender 35 plus shipping. Great shape.
95 m6 console. Not very good shape, all there. Price reflects. Comes with stock shift **** and shaft. 35 plus shipping.
