Parting Out 94 Z28 A4
Thread Starter
Registered User
Joined: Dec 2002
Posts: 165
From: Ware, Massachusetts
Parting Out 94 Z28 A4
I am parting out my 94 A4 Z28...many parts available. Pretty much everything minus the motor is available. If you need anything email me at NtenseZ28@comcast.net and I'll let you know if it's available. Many parts are still on the car and I will post them as I get it all torn apart. Pictures are available for pretty much anything...and if I don't have it pulled yet, I will pull it and take a pic of it upon request. This is as far as I have got thus far...
BMR Tubular K-Member. Powdercoated silver by BMR. Was installed, but never saw a motor. Powdercoating is perfect except where the bolts were...very minimal marks. All other parts that aren't in contact with bolts are perfect. Never saw rain, snow, or even sunshine for that fact because the car has been garaged. Paid over 520 with shipping. Pics available. $375 obo plus shipping
Stock 94 PCM - A4 - stock programming $40 plus shipping
Tie rod ends...new MOOG aftermarkets...were installed, but never saw the weight of the car as it has been off the ground since they were installed. Comes with Energy Suspension Poly dust boots - Pic avail $15 for both + shipping
New wheel bearing assembly with speed sensor. Never saw the weight of the car....so it never spun at all. Paid $80 new from Napa - $35 + shipping
Energy Suspension Poly Torque Arm Mount - Never installed $7 shipped
Everything must go...more parts to come...if you need a stock part email me and I will get back to you. The car wasn't wrecked at all...so many good parts still available.
BMR Tubular K-Member. Powdercoated silver by BMR. Was installed, but never saw a motor. Powdercoating is perfect except where the bolts were...very minimal marks. All other parts that aren't in contact with bolts are perfect. Never saw rain, snow, or even sunshine for that fact because the car has been garaged. Paid over 520 with shipping. Pics available. $375 obo plus shipping
Stock 94 PCM - A4 - stock programming $40 plus shipping
Tie rod ends...new MOOG aftermarkets...were installed, but never saw the weight of the car as it has been off the ground since they were installed. Comes with Energy Suspension Poly dust boots - Pic avail $15 for both + shipping
New wheel bearing assembly with speed sensor. Never saw the weight of the car....so it never spun at all. Paid $80 new from Napa - $35 + shipping
Energy Suspension Poly Torque Arm Mount - Never installed $7 shipped
Everything must go...more parts to come...if you need a stock part email me and I will get back to you. The car wasn't wrecked at all...so many good parts still available.
Last edited by NtenseZ28; Aug 13, 2005 at 08:02 PM.
Thread Starter
Registered User
Joined: Dec 2002
Posts: 165
From: Ware, Massachusetts
Re: Parting Out 94 Z28 A4
Originally Posted by gs1000kat
i am looking for a front bumper cover. Do you have it? What condition/color and most importantly, how much?
Registered User
Joined: Dec 2004
Posts: 26
Re: Parting Out 94 Z28 A4
Originally Posted by NtenseZ28
The bumper cover is fine...but the car has a custom paint job that is black with silver racing stripes that go nose to tail. Would let it go real cheap as the bottom paint is a little scraped up. If the paint were to be stripped off and repainted it would fine.
Thread Starter
Registered User
Joined: Dec 2002
Posts: 165
From: Ware, Massachusetts
Re: Parting Out 94 Z28 A4
Originally Posted by 95Cam86Roc
What color is the interior? I am looking for a set of black seats.
Registered User
Joined: May 2005
Posts: 79
Re: Parting Out 94 Z28 A4
How much for the shifter plate, and the taillights? pics if you may to scwizzo@yahoo.com
Thread Starter
Registered User
Joined: Dec 2002
Posts: 165
From: Ware, Massachusetts
Re: Parting Out 94 Z28 A4
Originally Posted by LT1-Z
How much for the shifter plate, and the taillights? pics if you may to scwizzo@yahoo.com
As for the speaker grills...those will go along with the door panels
