I recently wrecked my '91 Z28 and need to part it out fast to recoup my losses (no collision coverage). The car was wrecked in the front passenger side. Here is a list of parts. If you don't see something listed, feel free to ask.

-Motor: ZZ4 short block Fast Burn aluminum heads LT4 Hot Cam 1.6 roller tip rockers LT4 intake manifold - modified to fit the Fast Burn heads Remote thermostat housing LS1 28 lb/hr injectors Fuel rails with Aeromotive AFPR Edelbrock aluminum water pump Proform distributor and MSD coil (2 weeks old) Taylor plug wires w/ Made For You centerbolt looms(also 2 weeks old) Custom burned prom by me

-T56 transmission: All parts needed for conversion LT4 pressure plate/clutch Pro 5.0 shifter with Lou's short stick Spohn crossmember w/ integral torque arm

-4th gen Firebird gray leather seats

-17x9 5 spoke SS wheels with 2 good Firestone SZ50 tires

-2 front (Skulte)/2 rear (Vette Brakes) aluminum wheel adapters for above wheels

-ZO6 front brakes (everything needed to install on a thirdgen) Power Slot rotors Hawk pads Earls Stainless lines These brakes have less than 500 miles on them

-3.23 posi rear end w/ disc brakes

-brand new set of Motive 3.73 gears and Torsen take-off posi unit (didn't get a chance to install these)

-Slot Car Racing spherical rod-ended rear control arms and panhard bar

-Kenny Brown 3 point strut tower brace

-Tubular chromoly front a-arms w/ spring perches

-3.5 inch Lingenfelter aluminum drive shaft

-Hooker shorty headers

Everything else on the car is also for sale....feel free to ask me for a part if you don't see it listed.

Thanks Steve

 

how much for the front coil springs. also the gear how much

 

I NEED THE POSI...please let me know if you still have it

 

and the center console too ..
how much you want if i pick this stuff up?

 

What about the wheels? Price?

 

Fast Burn aluminum heads 1.6 roller tip rockers LT4 intake manifold - modified to fit the Fast Burn heads will this fit a LT1 block and if so how much?

 

how much for the t-56 and all the hardware?

 

the rear-end?

 

leather interior price? condition?

 

rims....whats the price on them. are they all in good condition, any pics? thanx, l8tr

 

Everyone please respond by PM or email at nadolss@clemson.edu I have had so many inquiries on these parts and that's the only way I can keep things organized. Thanks

Steve

 

Very Very Very interested.. I'm sending a PM.

Josh

 

how much for the headers? what kind of condition are they in? how much hp would it add to my stock 95' LT1?