All parts pulled and can ship within 24 hours
All of the parts listed are in good -great condition unless otherwise stated.
All all of the parts I have are listed, the car carcass is gone, if its not listed, I do not have it.

All prices listed INCLUDE SHIPPING TO THE CONTANENTAL US
if you live outside the US ask about shipping.
If you want to pick up form crown point IN 46307 ask about pickup price


Complete LT-1 With accessories and Manifolds, sensors, harness and ECM
Hotcammed, Delteq $1500

Stock heads (bare) $200
Stock crank 100$ 69k miles
Stock pistons /rods/ rodbolts 69k miles 50$
Stock valvetrain (2 sets) 40$
Egr Valve 10$
Air pump 10$
Stock camshafts (2) 25$
New oil pressure sensor 25$
Master Cylander 40$
ABS controler (complete) 120$
Stock Headbolt set Used once 15$
Stock Intake bolt set 10$
Main bolt/stud Set 10$
Crank bolt 5$
Windage trey 10$
Throttle cover 5$
Radiator Shroud 30$
Switchpanel cover 5$
Stock timing Set (69k Miles)20$
Opti Pulled off to put on Delteq, may be bad, looks ok 30$
Stock Fuel injector set (69k) sealed since removed 50$
Brake booster hose 5$
Oil cooler bolts (special bolts) 5$
Stock 180 degree thermostats (2) 5$
PST 32MM swaybar RED and sealed ES bushings
Swaybar is used and a bit scratched, bushings are new 75$
Trunk Release button 5$
Airfoil 20$
Spark plug boot covers (5) 5$
Box of suspension bushings 10$
Stock Torque Converter (69k) 75$
Stock calipers (pair) 50$
Fusebox complete 15$
Power Steering reservior 10$


Trans (auto) gear selecter panel 15$
Passenger door handle bezel 15$
Ebrake Assy 25$
Body control module 20$
Park Neutral Switch 20$
HVAC controls w/***** 20$
Headlight controls 20$
Passenger window /lock controls 20$
Defrost switch 5$
Right turn signal 15$
Sail Panel (opposite spare tire panel) 30$
Spare Tire 40$
Partition 30$
Wheel Caps (4) 10$ each
Gauge Cluster 50$

PM me if you want refrences Ive sold many parts online.

 

does the airfoil come with the screw and bracket. what brand is it.

 

foglights all work? if so i got dibs. post pic of intake elbow.

 

who is the air foil made by?

 

Are the calipers front or rear, and if rear, are they good shape/compatible with a 99?

Thanks

 

The Airfoil is TPI, it has no bracket, screw, or screw hole. it is held in by the elbow.

The foglights work, the intake elbow is pending sale.

The calipers are front and are pending sale.

Both items will be up for graps again if the bidder does not pay within 24 hours.

 

how about the 2 short bolts that hold the k-member on?there are 6 of them 4 of them are long and then 2 of them are about 2 inches long...those are the 2 that i need

let me know

tonylittell@msn.com

 

What condition is the e-brake assembly in? Any blemishes? How about the defroster switch? Hows the white printing on it? I'm looking for a black switch w/ white printing to replace my usightly grey switch w/ yellow printing...

 

I didnt keep track of the K-member bolts I was in such a hurry to get the motor out. I dont think I'll be able to find them but I'll PM you if i do.

I noted one very minor scratch on the leather part of the ebrake. something you probably wouldnt even notice with it in the car. I think the defroster switch is perfect but I will have to check in the morning and PM you.

 

list updated!

 

I need the two rear e-brake cables... do you have them?

 

How many miles on the LT1? Any head work done?

 

are you going to sell any parts of the body? if so im looking for rear driverside qrt panel.. im in il so i may beable topick up also

 

i paid him for his foglights and he hasn't sent them yet, nor has he replied since then... buyer beware maybe?

 

oh hasnt replied yet either here