NX Hitman Plus (carb) plate nitrous system *COMPLETE*

Hitman Plus carb system..adjustable from 50-200 HP

NX Blow down tube & NX Bottle Pressure Gauge #NX-11708 & NX-15509

NX "White" Pure-Flo N20 Filter..lifetime rebuildable & cleanable..#NX-15607

NOS Fuel pressure safety switch #741-15750

Misc lines & AN fittings

MSD RPM activated window switch #121-8956

Competition Motorsports WOT switch & bracket for 4150 style carbs(Holley/Demon) #CMT-NS170

NX Purge solenoid & manifold #744-15600

This is a complete system for a carbed car..you will need nothing else to use.Will not part any of the n2o system.

Moroso Super Cool Can #MOR-65125:brand new in box never used

Moroso U-Joint Girdles: Made from 7075-T6 aluminum, the Moroso U-Joint girdle has a unique design which provides more bearing surface for the universal joint bearing cap. The result is greater strength compared to conventional girdles. The girdle has an anodized finish and comes complete with fasteners

1 part #710-85800:Chevrolet: 1955-82 rear axles with U-bolts; Dana: All Dana 60 axles with U-bolts, aluminum, gold anodized, U-joint girdles...brand new never used

1 part #710-85810:GM: 1965-82 12-bolt, with straps, red anodized, U-joint girdles...brand new never used

Moroso #MOR-24350 oil pump pickup for Moroso oil pans.
Fits Chevrolet: 262-400, fits MOR-19510, MOR-19520, MOR-20180, MOR-20181, MOR-20182, MOR-20190, MOR-20191, MOR-20200, MOR-20205, MOR-20230, MOR-21010, MOR-21015, MOR-21900, MOR-21901 oil pans...fits MEL-M55HV, SLP-224-4143 or MOR-22110 oil pumps..installed on oil pump then removed but never installed on motor

Center Line Auto Drags (2 rims...satin finish) used..15"x8.5" w/3.5" backspacing...brand new center caps...*MINT* shape..no curb rash at all

Remanufactured CC Q-Jet...came off of 1984 Impala..used for 1 month...have receipts

Comp Cams Magnum pushrods #7693-16: .100 in. long, 5/16 in. diameter, 7.900 in. long...hardened for use with guideplates...one piece C1020 high carbon .080 wall steel...brand new in package never used

Barry Grant #BGI-140006: -8 AN carburetor inlet kit...Barry Grant/Demon series carbs, braided stainless steel, 9/16 in.-24 thread dual inlet fuel bowl fittings...brand new never used

TCI #351073 "Quick Disconnect" starter harness for GM starters..brand new never used

MSD #MSD-8401 HEI Dust Cover
This modified HEI dust cover allows you to remove the stock HEI coil in your distributor cap and replace it with an externally mounted coil. By going with an external coil, you increase the reliability and performance of the stock HEI system...used for 1,300 miles

GTS "Blackouts" #GT0261S: smoked covers for headlights & parking lights...'98 & up S10 Pick-Up or Blazer...used 4 pieces in good shape

APC #404012TLBT: used smoked third brake light cover (w/ red chevrolet bowtie) for '94 & up regular cab S10...good shape

Belltech 3" lowering block kit (non angled ): missing 1 u-bolt from box..everything else brand new in box

 

How much do you want for the following:

NX "White" Pure-Flo N20 Filter..lifetime rebuildable & cleanable..#NX-15607

Misc lines & AN fittings

NX Purge solenoid & manifold #744-15600


Thanks,

Jody J.

 

Sorry..I don't want to part out the system.I want to try and sell the n2o system as a whole.

 

Sorry, I over looked that line.

Jody J.