Nitrous Parts Direct Port
Thread Starter
Registered User
Joined: Jan 2005
Posts: 44
Nitrous Parts Direct Port
These Are New Never Installed --- Fuel Rail Covers are already Sold
LC-1 Wideband Air/Fuel Ratio Gauge --Round Display $260.00
LC-1 Lambda Cable (Standalone Wideband Controller) with widebband 02 Sensor and our Billet round 2-1/16" display in a stand alone package deal. Comes with everything you need even the weld on bung. No computer needed as this kit is stand alone and ready to go!
Bosch Wideband Sensor Included* The LC-1 is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1, and includes digital input, output, and 2 programmable analog outputs. This gauge comes with everything you need to monitor your air fuel ratio in your vehicle. It can optionally be programmed to output data or be configured to work with aftermarket fuel injection systems. Comes with a weld on bung, instructions, software(not needed to run this gauge as the kit comes ready to go, simply plug and go, no computer needed to configure this gauge. Works from 10:1 to 20:1 Air/Fuel ratio.
Note: Not for use with two stroke engines
Round Digital Nitrous Pressure Gauge $160.00
DynoTune Digital Nitrous Pressure Gauges Perform
The DynoTune Digital Nitrous Oxide Pressure Gauge is the most accurate NOS pressure Gauge available. The superior Digital displays are available in RED LED or GREEN backlight LCD. The displays are so good tthey are even viewable in direct sunlight! The Gauge is Full Billet Aluminum and 2-1/16". Show quality! Racers, pay attention, this help improve your consistency dramatically. You can now purge at the line until the exact NOS pressure is reached, run after run after run. Consistency is the name of the game. Those Other Dial gauges are off by typically 50-80PSI!!! The sending unit on this kit is compact and easy to install. It removes with a quick Disconnect and a complete wiring harness comes with the kit. Works from 9Volts to 14 Volts
I have tried many of the competition's Nitrous Gauges and they don't even come close to the DynoTune model.
Compare the following features:
Digital Display
1 PSI Resolution
Direct Sunlight Viewable
9-14 Volt Operation
Super Low Current Draw
Simple installation
Billet package
Round 2-1/16" Nitrous Switch Center $140.00
DynoTune Nitrous Switch Centers Perform!!!
This 100% Billet Nitrous switch center will simplify all your nitrous wiring needs. You can mount the Switch Center in a pod or any 2-1/16" hole. We use an Aluminum nut on the backside, no silly rubber bands like the other brands...
You simply hook-up the 7' long cable to your existing relays (you must use relays with this switch or you may damage it as Nitrous products draw in excess of 20 AMPS!). The switch panel uses built in LED's to indicate what is powered on. The Nitrous Control Center Provides 12Volt output on the Control wires to power your Devices Relays.
Bezels can be ordered in Black or Silver. Face colors in whir or black. They are Show quality and look amazing!
It comes with complete instructions and Mounting Hardware. It works with all motor style openers like DynoTune, NX, Zex. Works with all NOS brand openers. Does not work with solenoid style openers made by compucar etc.., email us if your not sure what kind you have.
Camaro / Firebird T-Top 3 Guage Pillar Pod $50.00
Brand: Auto Meter
Product Line: Auto Meter Pillar Gauge Pods
Part Type: Gauge Mounting Pods, Pillar
Gauge Diameter (in): 2 1/16 in.
Pod Style: Triple
Pillar Coverage: Full
Pod Color: Black
Quantity: Sold individually.
Gauge Pod, Triple 2 1/16 in., Black ABS, Chevy/Pontiac, Camaro/Firebird, with T-Tops, Each
I will sell All of these Guages, Pillar Pod, and LC1 Controller together as a package for :nod:$575.00 + Shipping Even with some of these on sale right now the retail value of the package is $646.99 with sale prices.
NX Nitrous Setup New Unopened Intake has been installed and Has been driven less than 700 miles. Nozzles Installed by Nitro Dave with FAST 90 Intake Ported and Nick Williams Throttle body $2500.00 obo I have well over $3000.00 in this setup
When space is tight but performance is still a requirement, the patented “Piranha” nozzle is the answer. At just half the size of its big brother, the “Shark”, the “Piranha” still packs a powerful bite. Designed specifically for the GM LT1/LT4 intakes this kit fits perfectly in the F-Body or Corvette. Nitrous system comes complete with 10lb bottle, stainless bottle brackets, “Next Generation” rail, fuel pressure regulator, stainless hard lines, nozzles, jetting, and all necessary electrical components.
I Will Sell All Components Above for $2900.00 + Shipping obo as a package with your ls6 intake as trade Thats a Savings of $850.00 Off What I Paid and you will have the Best of the Best N20 Systems:nod:
MAKE OFFERS
Let me know,
Earl
336-262-4225 cell
336-928-9874 home
LC-1 Wideband Air/Fuel Ratio Gauge --Round Display $260.00
LC-1 Lambda Cable (Standalone Wideband Controller) with widebband 02 Sensor and our Billet round 2-1/16" display in a stand alone package deal. Comes with everything you need even the weld on bung. No computer needed as this kit is stand alone and ready to go!
Bosch Wideband Sensor Included* The LC-1 is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1, and includes digital input, output, and 2 programmable analog outputs. This gauge comes with everything you need to monitor your air fuel ratio in your vehicle. It can optionally be programmed to output data or be configured to work with aftermarket fuel injection systems. Comes with a weld on bung, instructions, software(not needed to run this gauge as the kit comes ready to go, simply plug and go, no computer needed to configure this gauge. Works from 10:1 to 20:1 Air/Fuel ratio.
Note: Not for use with two stroke engines
Round Digital Nitrous Pressure Gauge $160.00
DynoTune Digital Nitrous Pressure Gauges Perform
The DynoTune Digital Nitrous Oxide Pressure Gauge is the most accurate NOS pressure Gauge available. The superior Digital displays are available in RED LED or GREEN backlight LCD. The displays are so good tthey are even viewable in direct sunlight! The Gauge is Full Billet Aluminum and 2-1/16". Show quality! Racers, pay attention, this help improve your consistency dramatically. You can now purge at the line until the exact NOS pressure is reached, run after run after run. Consistency is the name of the game. Those Other Dial gauges are off by typically 50-80PSI!!! The sending unit on this kit is compact and easy to install. It removes with a quick Disconnect and a complete wiring harness comes with the kit. Works from 9Volts to 14 Volts
I have tried many of the competition's Nitrous Gauges and they don't even come close to the DynoTune model.
Compare the following features:
Digital Display
1 PSI Resolution
Direct Sunlight Viewable
9-14 Volt Operation
Super Low Current Draw
Simple installation
Billet package
Round 2-1/16" Nitrous Switch Center $140.00
DynoTune Nitrous Switch Centers Perform!!!
This 100% Billet Nitrous switch center will simplify all your nitrous wiring needs. You can mount the Switch Center in a pod or any 2-1/16" hole. We use an Aluminum nut on the backside, no silly rubber bands like the other brands...
You simply hook-up the 7' long cable to your existing relays (you must use relays with this switch or you may damage it as Nitrous products draw in excess of 20 AMPS!). The switch panel uses built in LED's to indicate what is powered on. The Nitrous Control Center Provides 12Volt output on the Control wires to power your Devices Relays.
Bezels can be ordered in Black or Silver. Face colors in whir or black. They are Show quality and look amazing!
It comes with complete instructions and Mounting Hardware. It works with all motor style openers like DynoTune, NX, Zex. Works with all NOS brand openers. Does not work with solenoid style openers made by compucar etc.., email us if your not sure what kind you have.
Camaro / Firebird T-Top 3 Guage Pillar Pod $50.00
Brand: Auto Meter
Product Line: Auto Meter Pillar Gauge Pods
Part Type: Gauge Mounting Pods, Pillar
Gauge Diameter (in): 2 1/16 in.
Pod Style: Triple
Pillar Coverage: Full
Pod Color: Black
Quantity: Sold individually.
Gauge Pod, Triple 2 1/16 in., Black ABS, Chevy/Pontiac, Camaro/Firebird, with T-Tops, Each
I will sell All of these Guages, Pillar Pod, and LC1 Controller together as a package for :nod:$575.00 + Shipping Even with some of these on sale right now the retail value of the package is $646.99 with sale prices.
NX Nitrous Setup New Unopened Intake has been installed and Has been driven less than 700 miles. Nozzles Installed by Nitro Dave with FAST 90 Intake Ported and Nick Williams Throttle body $2500.00 obo I have well over $3000.00 in this setup
When space is tight but performance is still a requirement, the patented “Piranha” nozzle is the answer. At just half the size of its big brother, the “Shark”, the “Piranha” still packs a powerful bite. Designed specifically for the GM LT1/LT4 intakes this kit fits perfectly in the F-Body or Corvette. Nitrous system comes complete with 10lb bottle, stainless bottle brackets, “Next Generation” rail, fuel pressure regulator, stainless hard lines, nozzles, jetting, and all necessary electrical components.
I Will Sell All Components Above for $2900.00 + Shipping obo as a package with your ls6 intake as trade Thats a Savings of $850.00 Off What I Paid and you will have the Best of the Best N20 Systems:nod:
MAKE OFFERS
Let me know,
Earl
336-262-4225 cell
336-928-9874 home
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
oldschool
Parts For Sale
16
Feb 9, 2016 09:21 PM