N20,headers,cam,stall,pistons,crank...
Thread Starter
Registered User
Joined: Sep 2005
Posts: 209
N20,headers,cam,stall,pistons,crank...
Okay i am with my new motor dropping a valve i have decided to build another but going a different route. I am going to build a turbo car. Should be starting on it this week and hopefully done within 3 so i decided to help fund it by selling the thing that i wont need anymore.
NOS N20 wet kit- Has EVERTHING!!! Lines, relays, solinoids, nozzel, bottle, purge, bottle heater, feul pressure safty switch... if you buy this kit the only thing you might need is different jets. Its jetted for a 125 shot. I would like 450 plus shipping or best offer.
MAC Mid length headers - Ceramic coated, These were like 650 new. Comes with off road y pipe. 250.00 plus shipping or beast offer.
I have a comp cam for sale. It has been ran for mabey 3000 miles. Its an AWSOME sounding cam. Its a 236/242 580 ish lift (with 1.5 RR) on a 114LSA
I would like 200 shipped on this one.
next i have a TCI coverter. It has roughly 5000 miles on it. It is a 2600 or 2800 stall (cant remember) I pais over 500 for this converter and i just need a bigger one for the direction i am heading. This is an awsome street stall. I woud like 300 plus shipping.
i also have a scat 9000 crank (1 piece) seal that was in the motor when it dropped a valve. It is in perfect condition, it would be great to use again but i will be pushin the limits of a cast crank and i dont want to build three motor uin a year two is enough!!!
it has less then 1000 miles on and i would like 125 plus shipping
Set of 7 TRW 2256f forged 4.00 bore pistons for 5.7 rod. 7 in great shape one not so gopod from valve hitting it 100 times. You can buy these individually for around 30-40 bucks i will sell the 7 for $100 plus shipping.
if you have an questions please ask!
Chris
NOS N20 wet kit- Has EVERTHING!!! Lines, relays, solinoids, nozzel, bottle, purge, bottle heater, feul pressure safty switch... if you buy this kit the only thing you might need is different jets. Its jetted for a 125 shot. I would like 450 plus shipping or best offer.
MAC Mid length headers - Ceramic coated, These were like 650 new. Comes with off road y pipe. 250.00 plus shipping or beast offer.
I have a comp cam for sale. It has been ran for mabey 3000 miles. Its an AWSOME sounding cam. Its a 236/242 580 ish lift (with 1.5 RR) on a 114LSA
I would like 200 shipped on this one.
next i have a TCI coverter. It has roughly 5000 miles on it. It is a 2600 or 2800 stall (cant remember) I pais over 500 for this converter and i just need a bigger one for the direction i am heading. This is an awsome street stall. I woud like 300 plus shipping.
i also have a scat 9000 crank (1 piece) seal that was in the motor when it dropped a valve. It is in perfect condition, it would be great to use again but i will be pushin the limits of a cast crank and i dont want to build three motor uin a year two is enough!!!
it has less then 1000 miles on and i would like 125 plus shipping
Set of 7 TRW 2256f forged 4.00 bore pistons for 5.7 rod. 7 in great shape one not so gopod from valve hitting it 100 times. You can buy these individually for around 30-40 bucks i will sell the 7 for $100 plus shipping.
if you have an questions please ask!
Chris
Guest
Posts: n/a
can i get pics of these headers sent to solarofthesix@hotmail.com
Registered User
Joined: Apr 2006
Posts: 134
From: FLORIDA
interested in the NO2 kit send pics to ftperfomance@yahoo.com
Thread Starter
Registered User
Joined: Sep 2005
Posts: 209
Thread
Thread Starter
Forum
Replies
Last Post