My old heads/cam/intake setup(11.71 at 116.7 n/a)...$1300 shipped
#1
My old heads/cam/intake setup(11.71 at 116.7 n/a)...$1300 shipped
For an lt1, its a custom Joe overton 220/226 548/548 cam(my old baby cam). Heads are from Lloyd Elliot and flow 274/195 at .600(will get the rest of the #'s posted). The heads have all new intake valves and new springs.(replaced since they were off the car anyways) The intake is ported by Lloyd also. :thumbup: This is my old setup that I ran last year. :thumbup:
I NEED these gone before Friday so they are priced at a steal. :yup:
$1300 shipped FIRM.
First person to get me cash gets them. :thumbup: They are posted on lots of other boards also.
913-963-3797 is my cell. :thumbup:
I've bought/sold many things on here and other boards without any problems before.
I NEED these gone before Friday so they are priced at a steal. :yup:
$1300 shipped FIRM.
First person to get me cash gets them. :thumbup: They are posted on lots of other boards also.
913-963-3797 is my cell. :thumbup:
I've bought/sold many things on here and other boards without any problems before.
#3
Re: My old heads/cam/intake setup(11.71 at 116.7 n/a)...$1300 shipped
flow numbers on these heads are
lift intake exhaust
.1 65.1 52.9
.2 136.0 103.1
.3 190.5 141.5
.4 236.9 170.0
.5 267.3 185.6
.6 274.4 195.1
.7 270.9 201.0
these ran damn good on both cars they were on i never tuned my car just adjusted for 30lb injectors and didnt ever get full boltons but put down 389/368
torque was within 10 ft lbs from 2800 up without tune
with tune and tb , electric water pump should EASILY put down over 400
lift intake exhaust
.1 65.1 52.9
.2 136.0 103.1
.3 190.5 141.5
.4 236.9 170.0
.5 267.3 185.6
.6 274.4 195.1
.7 270.9 201.0
these ran damn good on both cars they were on i never tuned my car just adjusted for 30lb injectors and didnt ever get full boltons but put down 389/368
torque was within 10 ft lbs from 2800 up without tune
with tune and tb , electric water pump should EASILY put down over 400
#5
Re: My old heads/cam/intake setup(11.71 at 116.7 n/a)...$1300 shipped
Originally Posted by 93 4mula
What size valves are in the heads? What type of springs? How much you looking for just the heads?
#6
Re: My old heads/cam/intake setup(11.71 at 116.7 n/a)...$1300 shipped
Quick question man...are those cam specs with 1:6 roller rocker, and can I use Self Aligning rr's with that set-up...or would NSA with guidplates be required..looks like fairly small cam, I run SA rockers with the hotcam with no issues, just wondering on this cam and are the specs listed for 1:6's.
Thanks
Rod HarriSS
Thanks
Rod HarriSS
#7
Re: My old heads/cam/intake setup(11.71 at 116.7 n/a)...$1300 shipped
Originally Posted by 4-RILLA
Quick question man...are those cam specs with 1:6 roller rocker, and can I use Self Aligning rr's with that set-up...or would NSA with guidplates be required..looks like fairly small cam, I run SA rockers with the hotcam with no issues, just wondering on this cam and are the specs listed for 1:6's.
Thanks
Rod HarriSS
Thanks
Rod HarriSS
#8
Re: My old heads/cam/intake setup(11.71 at 116.7 n/a)...$1300 shipped
Damn! I just got some ported LT1's off Ebay late Monday night! Only if these were up sooner! I've been looking for LE heads!
Ramiro
Ramiro
#9
Re: My old heads/cam/intake setup(11.71 at 116.7 n/a)...$1300 shipped
hey i know youre trying to sell, so sorry this is off subject! ( free bump
just with the head, intake, cam combo. 1997 Formula, stock looking and daily driven...
Old setup...stock bottom end, LE heads, Joe O. BABY cam(~220/226) 11.710 at 116.76 ALL MOTOR
that is sooo bad ***!!!!! i am doing bigger heads, intake, and a gm 847, 1.6 rr's, some bolt ons and a tune, 97 Z M6 and i am looking at 400 give or take and figured 12.4 ( fast) how the hell did u go that fast? im not hating i am very curious!!! mad props to you! talk to me. ill have the package for 1300 NEW or else id get urs. but good buy! G/L
just with the head, intake, cam combo. 1997 Formula, stock looking and daily driven...
Old setup...stock bottom end, LE heads, Joe O. BABY cam(~220/226) 11.710 at 116.76 ALL MOTOR
that is sooo bad ***!!!!! i am doing bigger heads, intake, and a gm 847, 1.6 rr's, some bolt ons and a tune, 97 Z M6 and i am looking at 400 give or take and figured 12.4 ( fast) how the hell did u go that fast? im not hating i am very curious!!! mad props to you! talk to me. ill have the package for 1300 NEW or else id get urs. but good buy! G/L
#10
Re: My old heads/cam/intake setup(11.71 at 116.7 n/a)...$1300 shipped
The heads/cam was a matched setup and it has a FLAT torque curve. Peak rwhp means nothing, it's the curve thats important.
I went that fast with a good 60ft, correct gears, correct stall, good tires, etc.
I went that fast with a good 60ft, correct gears, correct stall, good tires, etc.
#11
Re: My old heads/cam/intake setup(11.71 at 116.7 n/a)...$1300 shipped
Justin,
I sent you a PM..I will be away from home for like the next 4-5 hours. Si if you end up replying..it could be a while before I get back to see it.
Peace
I sent you a PM..I will be away from home for like the next 4-5 hours. Si if you end up replying..it could be a while before I get back to see it.
Peace
#15
Re: My old heads/cam/intake setup(11.71 at 116.7 n/a)...$1300 shipped
Originally Posted by 4-RILLA
Hey Justin...forgot to ask wuts the LSA of that cam..Joe Overton usually goes 110 right...or is it 112.