drivefast4fun

I have a Mcleod Street twin clutch, SOLD


Set of LT1 heads, ported on a CNC machine. These came off of a 97 trans am ws6, flow numbers:


unported intake: 1.84 valve Ehaust: 1.50 valve
100 83/58 58/64
200 79/119 58.5/94
300 58/173 76/122
400 69/206 46/148
500 69/206 48/154
600 68/203 49/158

ported intake:2.00 valve exhaust: 1.56 valve
100 50/75 55.5/52
200 91/137 63/101
300 64/191 85.5/137
400 80/239 54/174
500 88/263 59/190
600 90/269 61/196
650 90.5/270 62/199
700 90.5/270 63/202


I would also like $1000 for these, and they come with a set of Fel-Pro #1045 gaskets that have the wire ring in them, all rebuilt with #6161 intake valves, #6165 Exhaust valves (sodium filled), #611-16 locks, #74016 retainers, #97716 Springs, #4771-169 cups.


I also have many various engine pieces, including:

97 Intake, ported
97 fuel rails, ends cut and -6 fittings tig'd on for larger lines.....PENDING
AC delete pully
one each, 97 and 95 crank hub
set of taylor custom length wires
brackets for engine accesories
front covers, one 97, one 95 (97 has crank trigger hole)
T56 out of the 97, rebuilt and driven for 5000 miles before I took car apart (has steel 3-4 shift fork, new better blocker rings, syncros, etc...the kit from D&D), Has Pro 5.0 shifter, but might take that off and sell seperately (SOLD)
full upper gasket set
two oil pans, both factory, one 95, one 97
two engine blocks, one 95 (bored .030 over), one 97, never bored, in good shape

I have quite a bit of stuff left over laying here, let me know if there is something specific you want or need, I might have. I have no body parts, and only a center counsel out of a camaro left that is in ok shape, but not perfect. I can get pictures of anything after Friday or Saturday when I get out of the hospital. I will just post them up here as requested so I dont have to send 50 seperate emails. Thanks for looking

rege9c1

do you still have the t56 and ported intake available? Shoot me a pm.

Thanks, Mike

JONEZ_Z

Im interested in the clutch. Do you still have it?

drivefast4fun

I still have the intake and the clutch, should be out of the hospital tomorrow (hopefully in the morning) and can get some pictures of each up. I am sorry, but the tranny has been spoken for here locally.

JONEZ_Z

I would like pics when you get a chance. dj317@hotmail.com

drivefast4fun

clutch:SOLD


this last picture the metal spacer is still in there.* I did not want to take it totally apart since this is the first time I have ever taken it even this far apart.* But if you need, I will take it the rest of the way down.

Here is the adjustable master with included braided hose to the slave, and rubber line to the fill container.




Here is the intake:





The intake was blasted by a friend in a sand blaster, so it will need a cleaning, a good one since he did not blow it out or anything when I got it back. I also have the fuel rails for this intake, with -6 fittings tig'd on if you would be interested

drivefast4fun

any interest in the clutch still?

jchevy

Hey, Ill take the clutch if no one has dibs on it. Do you take paypal?

drivefast4fun

well I put the pictures up for JONZ_Z on here, and have not heard from him, although I did not email them to his account as he had asked. I will send him a pm seeing if he still wants it, and if he does not, it is yours. I have used paypal in the past, but it has been quite a while. I need to make sure it is still active, or working, if they cancel or anything. Otherwise, I am sure we can work out something.

jchevy

Yeah, let me know, we will work something out.

drivefast4fun

Clutch is sold, fuel rails are pending