Fluidamper SBC 6 1/4" used 1 year---175.00
3 Gallon aluminum fuel cell---75.00
BG400pump and filter---400.00
Pete Jackson Gear drive---100.00
350 4bolt block .040---500.00
GM forged Nitraded crank---600.00
Weisco 11cc reverse dome pistons---400.00
Manley h-beam rods---400.00
Erson aluminum roller rockers---125.00
Summitt aluminum timing cover---45.00
Comp hardened 1 piece pushrods---75.00
Aluminum v-belt pulleys water pump, alt., crank---125.00
Turbo 400 built by cooks w/shift kit---450.00
Denny's drive shaft---150.00
1 wire chrome alternator---100.00
MSD pro billet distributer---150.00
Turbo Action cheetah shifter---250.00
MSD digital 6(used 3 races)---250.00
MSD blaster 2 coil---20.00
Moroso cool can w/mount---75.00
Taylor plug wires 8mm red--25.00
Moroso Oil pan deep w/fitting for turbo drain back--125.00
VICTOR JR SBC 64CC 23 degree heads(NEW)---1150.00
ADjsutable timing pointer--15.00
melling HV oil pump with moroso pickup---25.00
JW 3600 race Torque converter---550.00
F-body poly lower control arm bushings(NEW)--25.00
28x10.5 ET streets 30-40passes---200.00

Please e-mail me with any questions. Most engine componets have been run 20 minutes only most other stuff has been in the car 1 year or less with not much run time. will make deals on converter tranny package and engine componets bought together.. Just e-mail with what you want. BADMIRE68@aol.com

 

are your rockers self aligning? also, the Dennys driveshaft is stronger then and 1LE aluminum and stock steel, isn't it? Will if fit on my Z? Thanks I'm very interested.

 

the Denny's is definately stronger. Lifetime warranty on breakage. But it will only fit behind a Turbo 400 or long tail shaft turbo350.

The rockers are NOT self aligning

 

the 28x10.5x15 ET STREETS are actually ET DRAGS.

 

Would the denny's fit in a 1970 Nova with 350, Th-350 and 10 bolt? My friend's got one with 400 hp and big tires and he needs a d/s badly.

 

Not sure. Basically he would have to measure the from center of u-joint to center of u-joint and tell me the length. The yoke that is on the shaft will not fit a 350 only a 400.

 

you have mail....

 

what is the length on the dennys shaft? from center of u joint to center of u joint? thanks!

 

Driveshaft is sold