MagnaFlow Cat-back Exhaust 98-02 Camaro / Firebird 5.7 L ***NEW***
MagnaFlow Cat-back Exhaust 98-02 Camaro / Firebird 5.7 L ***NEW***
Manufacturer part #15684, with a suggested retail price of $544.18.
********** NEW IN BOX **********
Fit's the following Camaro and Firebird models:
1998-2002 5.7L V8, Z-28/SS, rear exit,
5x8x18" polished Stainless Steel muffler, 3/2.5" Stainles Steel tubing,
3.5" slash/polished Stainless Steel tips
1998-2002 5.7L V8, Trans-Am/WS-6/Firehawk,
rear exit, 5x8x18" polished Stainless Steel muffler,
3"/2.5" Stainless Steel tubing, 3.5" slash/polished Stainless Steel tip
MagnaFlow cat-back exhaust systems are fully COMPLETE and are stainless steel. Everything from the pipes, hangers, clamps, mufflers and tips. *Tips, mufflers, and resonators (where applicable) are "mirror finish", polished stainless steel. They come with everything needed to bolt up in place of your factory system using basic tools. No welding is required. Many customers install MagnaFlow systems themselves due to ease of installation. Most systems can be bolted on within 1-2 hours.
THE WIDE OPEN PERFORMANCE DIFFERENCE
MagnaFlow Performance mufflers are 100% polished stainless steel and lap-joint welded for solid construction and rugged reliability even in the most extreme conditions. They feature a free-flowing, straight-through perforated stainless steel core, stainless mesh wrap and acoustical fiber fill to deliver that smooth, deep tone. Mufflers are packed tight with this acoustical material unlike some others' products to ensure long life and no sound degradation over time. Backed by a Lifetime Warranty.
Purchased for $449.90 with shipping and handling.
My loss, your gain. $375.00 FIRM!
(530) 268-6680, Steve.
Feel free to check out our website:
www.margrafracing.com
********** NEW IN BOX **********
Fit's the following Camaro and Firebird models:
1998-2002 5.7L V8, Z-28/SS, rear exit,
5x8x18" polished Stainless Steel muffler, 3/2.5" Stainles Steel tubing,
3.5" slash/polished Stainless Steel tips
1998-2002 5.7L V8, Trans-Am/WS-6/Firehawk,
rear exit, 5x8x18" polished Stainless Steel muffler,
3"/2.5" Stainless Steel tubing, 3.5" slash/polished Stainless Steel tip
MagnaFlow cat-back exhaust systems are fully COMPLETE and are stainless steel. Everything from the pipes, hangers, clamps, mufflers and tips. *Tips, mufflers, and resonators (where applicable) are "mirror finish", polished stainless steel. They come with everything needed to bolt up in place of your factory system using basic tools. No welding is required. Many customers install MagnaFlow systems themselves due to ease of installation. Most systems can be bolted on within 1-2 hours.
THE WIDE OPEN PERFORMANCE DIFFERENCE
MagnaFlow Performance mufflers are 100% polished stainless steel and lap-joint welded for solid construction and rugged reliability even in the most extreme conditions. They feature a free-flowing, straight-through perforated stainless steel core, stainless mesh wrap and acoustical fiber fill to deliver that smooth, deep tone. Mufflers are packed tight with this acoustical material unlike some others' products to ensure long life and no sound degradation over time. Backed by a Lifetime Warranty.
Purchased for $449.90 with shipping and handling.
My loss, your gain. $375.00 FIRM!
(530) 268-6680, Steve.
Feel free to check out our website:
www.margrafracing.com
Thread
Thread Starter
Forum
Replies
Last Post



