Mac LS1 headers with ball flange adaptors for custom exhaust - $175

water pump - $40

stock air pump - $40

LS1 intake - $30

anodized red engraved chevy emblem shift ball - $25

Prothane tranny mount - $15

Prothane motor mount (only 1 side, I am using the other) - $20

pair stock 2000 Z28 16" wheels - $50 obo

OK, I accept paypal to nd@asu.edu for this stuff. No credit card payments from paypal, otherwise they take a cut off the top for the price and you will have to make up the difference. If you don't like the price, make a reasonable offer.

I will remove items from the list as I sell them.

 

Hey, Very interested in your Mac headers, have a few ?'s for you. First, do you have any pictures? 2nd, when you say adapters, you mean pieces of pipe with the mac style ball flange on there to weld to a customy, h, or x pipe for easy fitting? 3rd and final question, how much would shipping be to 48152. Thanks a ton! -Mike ooh I thought of a 4th question. What needs to be done to make these fit a 99? I noticed you have an 00. Thanks again.

 

My camera is screwed up, but I will try and borrow a friends to take some pictures. That is exactly what I mean when I say it just has the ball flange adapters for a custom exhaust/easy fitting. The shipping to that area code would be $25, however I am lowering the price to $175 because the one air fitting on the driver's side had the bolt break off. You could just drill it out and use a new bolt though, I just don't have the time to screw with it now. I think they should bolt right up to a 99 using the factory bolts.

 

How many miles on the water pump??

 

Please put me in Line for the MAC Headers.

Pics to DJporsche944turbo@msn.com

Questions:
Whick Y-pipe?
Any Coatings?
Condition? scrapes?
Miles of use?

 

There are ~20k miles on the water pump. Beware it is an LS1 water pump.

 

Like I said in my previous post above, it doesn't have a y-pipe, just the ball flange adapters for a custom exhaust setup. They just have the stock MAC coating on them, it is not a ceramic coating, just paint I believe. They are in fairly good condition with no real scrapes since they tuck up pretty well and can't really hit the ground. They were on my car for ~8k miles.

 

Oh yea, about the MAC headers. Somebody is going to trial fit them this week for a custom LS1 swap so they may be sold and may not be. I will keep this post updated.

 

I will take the headers if the custom fit thing falls through, I can deal with a bolt on one of the emissions things breaking off in there. Sending you a PM. Thanks!