Moving on to bigger and better setup. So Im selling my old setup here.
This setup ran a best of 7.28 N/A at 94.1 MPH with a turbo 350 and 7.8 N/A with a 6-speed and 7.48 on a 50 shot.


part out prices added.. prices are for the part only. or you can buy all for 2400+shipping and PP fees

What you get
58 MM BBk TB $200
30LB accel injectors $250
Fuel rails and adj. fuel regulator $80
All part below came from Flowtenics in WA.
LT4 intake port matched for heads and TB. Intake has had some port work don to it. $400
Custon grind hydro roller cam, lifter and harded pushrods used with cam spec below $350
Intake 236@.050; 344 lobe rise w/1.6 r.r. .550 Lift
Exhuast 245@.050; .358 lobe risew/1.6 r.r. 573 Lift
LT4 heads that have been ported and polshed $1500
Specs are
2.02 intake and 1.60 exhuast vavle
59cc; bronze guides, hardened spring pads and valve gudies plates

Flow numbers are
Lift Intake Exhuast
.300 192 162
.400 225 187
.500 259 203
.550 276 208
.600 283 213

I have over 4 grand in this setup.... 1st 2400 takes the complete setup. The heads and cam are still on the car till new setup get here or I will pull them when sold

I will give the person that buys it a copy of the tune.

I will throw in LT1 edit for 300.

If you have any questions my number is 325-864-1653

 

Where are you located? How many miles on all this stuff?

 

abilene tx maybe 1500 miles.

 

sell seperatlly? how much for injectors and how many miles also want the tb.

 

will consider that later..

 

Do you have just hte polylocks?

 

i do have poly locks...

 

Part out prices added to post..

 

500.00 cash for intake, injectors,fuel system,and throttle body,have a new set of afr 210 heads and custom cam already,i will pick up,let me know thanks donny,325-728-3908,taz4028@hotmail.com,i have a new complete victor intake setup,with elbow and wilson 90mm t body for lt1 also has a wilson pro flow n2o plate system #309106 and edelbrock fuel rails, this will not fit under the stock hood ,so i also have a new harwood bolt on cowl hood,i am going with a stock hood

 

e-mail sent...

 

Bump...

 

still got parts will start pulling them next week..

 

parts ready to be pulled..

 

bump..

 

bump..