LT4 heads, 2 WC T-5's, 224/230 cam, 650dbl carb
Thread Starter
Registered User
Joined: Jun 2003
Posts: 573
From: Just outside of "D-town"
LT4 heads, 2 WC T-5's, 224/230 cam, 650dbl carb
Ok im selling my stuff..i dont need it anymore.
First off is a set of LT4 heads..there factory and unmolested..they have Hotcam springs and lareger 2.02/1.60 valves..they were used less then 1000 miles..i want $1,000 for them
i have 2 WC T-5 trannies for sale...one is completly overhauled and rebuilt using all new parts..this is ready to go..$400 for that
the second one is untouched..it needs a rebuild..i have the rebuild kit for it..$300 for it and the kit
i have a comp cams XR224/230 cam its got .502/.510 lift..$100
Holley 650 dbl pumper 4777c carb..its untouched stock jets, needs a rebuild from sitting...$100
Centerforce dual friction clutch set...this coems with the pressure plate clutch disc and throwout bearing...this was broken in properly and has less then 1000 miles on it...$185 for the plate disc and T/O bearing this is the 10.5 inch clutch for 3rd gens
MSD ignition set up..6AL box Pro billet distributor #8631.. blaster 2 coil and msd wires..all for $300..SOLD
LT4 Carburated intake...$150
all these parts have less then 1000 miles on them..and are in LIKE NEW CONDITION...
Im in NY right now, i will be in MI in a week to take care of these parts...from now untill then feel free to buy them and when i pick them up ill ship them out right away
You can e-mail me @ akers_13@hotmail.com
or pm me
First off is a set of LT4 heads..there factory and unmolested..they have Hotcam springs and lareger 2.02/1.60 valves..they were used less then 1000 miles..i want $1,000 for them
i have 2 WC T-5 trannies for sale...one is completly overhauled and rebuilt using all new parts..this is ready to go..$400 for that
the second one is untouched..it needs a rebuild..i have the rebuild kit for it..$300 for it and the kit
i have a comp cams XR224/230 cam its got .502/.510 lift..$100
Holley 650 dbl pumper 4777c carb..its untouched stock jets, needs a rebuild from sitting...$100
Centerforce dual friction clutch set...this coems with the pressure plate clutch disc and throwout bearing...this was broken in properly and has less then 1000 miles on it...$185 for the plate disc and T/O bearing this is the 10.5 inch clutch for 3rd gens
MSD ignition set up..6AL box Pro billet distributor #8631.. blaster 2 coil and msd wires..all for $300..SOLD
LT4 Carburated intake...$150
all these parts have less then 1000 miles on them..and are in LIKE NEW CONDITION...
Im in NY right now, i will be in MI in a week to take care of these parts...from now untill then feel free to buy them and when i pick them up ill ship them out right away
You can e-mail me @ akers_13@hotmail.com
or pm me
Last edited by MY91Y84; Oct 28, 2006 at 06:59 PM.
Thread Starter
Registered User
Joined: Jun 2003
Posts: 573
From: Just outside of "D-town"
The cam is on a 112, its in very good condition..yes its for an LT1..the only thing you have to do is replace the dowel pin...i cut it down because this was in a carbe motor and it wouldt clear the block off plate...so when you take out your stock cam pull out the dowel pin that put that one in the 224..simple
Registered User
Joined: Mar 2005
Posts: 12,312
From: Aurora, IL
Would you happen to have pics. of the cam? If so, could you send them here gtpcamaroz@yahoo.com Thanks. Also, do you still have the cam card? This is the "CC503" cam, correct. Thanks again.
Last edited by 2000GTP; Oct 29, 2006 at 03:14 PM.
Thread Starter
Registered User
Joined: Jun 2003
Posts: 573
From: Just outside of "D-town"
i took some pics when i put the motor together, but i dont know were tehre at...i bought a digital about a year ago and never really took care of my 35mm pics...the cam is in excellent condition..the cam card had motor oil spilled on it so i tossed it
yes it is the 503
yes it is the 503