For sale: Low mileage [16] GMPP/LT4 1.6 roller rockers. They are meant for 3/8 studs and are self aligning. Come with [16] 3/8 poly locks. No scuffing, no hot spots, no grinding, all in very good condition. GM part number: 19210729. They are basically narrow body Crane rockers

GM's statement on the rockers: These small block 1.6:1 ratio aluminum rockers are similar to the rockers used in the 1996 Corvette LT4 engine. These kits of 16 rockers include nuts and instruction sheets. They are self-aligning style rockers with washers between the rollers and the rocker body for improved wear characteristics. Reducing the length of the rocker stud slots improves the stiffness by 30% over comparable aftermarket designs. These rockers will accommodate up to .575" valve lift. One of the main advantages of these rockers is about 2 lbs-ft in rotation torque which provides a quieter idle.

$185 shipped



I also have some Comp 7808-16 pushrods that I'd throw in for free, they are stock 7.200 length.

-Dustin-

 

Bump.

-Dustin-

 

SOLD

-Dustin-