LT1 Solid Cam and Lifter Combo
Thread Starter
Registered User
Joined: Sep 2004
Posts: 26
From: Perth Amboy,N.J
LT1 Solid Cam and Lifter Combo
For Sale New.
Comp Cams Solid Cam Custom Grind
Grind Number CS 4157/288R-6 R12
Serial no N 2175
Intake Exhaust
Valve Adjustment .020 .022
Gross Valve Lift .600 .609
Duration At
.020 Tappet Lift 288 288
At .050 INT 16 BTDC 52 ABDC
EXH 64 BBDC 12 ATDC
These Specs are for cam installed
at 108 intake center line
Duration at .050 248 256
Lobe Lift .4000 .4060
Lobe Separation 112
And the Lifters are Comp Cams part # 873-16
Asking For $450.00 or best offer for the set will not part.i'll pay shipping
Thanks,
Santos
Comp Cams Solid Cam Custom Grind
Grind Number CS 4157/288R-6 R12
Serial no N 2175
Intake Exhaust
Valve Adjustment .020 .022
Gross Valve Lift .600 .609
Duration At
.020 Tappet Lift 288 288
At .050 INT 16 BTDC 52 ABDC
EXH 64 BBDC 12 ATDC
These Specs are for cam installed
at 108 intake center line
Duration at .050 248 256
Lobe Lift .4000 .4060
Lobe Separation 112
And the Lifters are Comp Cams part # 873-16
Asking For $450.00 or best offer for the set will not part.i'll pay shipping
Thanks,
Santos
Last edited by kamikaz; Oct 8, 2004 at 02:17 PM.
Registered User
Joined: Apr 2004
Posts: 1,347
From: Austin/Houston, TX
Re: LT1 Solid Cam and Lifter Combo
Im interested. Would i need new pushrods?
I have 1.6 rockers, which would make it 650 lift... would this work on a 383 w/ KB dish pistons?
Do you have any other matching valvetrain parts like springs and 1.5 rockers?
I have 1.6 rockers, which would make it 650 lift... would this work on a 383 w/ KB dish pistons?
Do you have any other matching valvetrain parts like springs and 1.5 rockers?
Thread Starter
Registered User
Joined: Sep 2004
Posts: 26
From: Perth Amboy,N.J
Re: LT1 Solid Cam and Lifter Combo
I had the springs on a set of heads i just sold recently..as for the push rods,somebody just answered that for you 
if still interested let me know,just make offer all parts are NEW
Thanks
Santos
if still interested let me know,just make offer all parts are NEW
Thanks
Santos
Registered User
Joined: Mar 2004
Posts: 378
From: austin
Re: LT1 Solid Cam and Lifter Combo
to run a solid roller setup you should get the folowing:
a good set of roller rockers (comp pro mag 7/16)
a good set of springs (depends on the cam, the manufacturer can help you with that)
titanium retainers
7/16 studs for your rocker arms
stud girdle
valve covers to fit over the stud girdle
good set of 3/8 pushrods
im sure there are some more things that i am missing but this is most of the parts. you dont have to have this exact list, but solid rollers require stronger parts and are a bit more expensive when compared to your typical hydraulic setup.
a good set of roller rockers (comp pro mag 7/16)
a good set of springs (depends on the cam, the manufacturer can help you with that)
titanium retainers
7/16 studs for your rocker arms
stud girdle
valve covers to fit over the stud girdle
good set of 3/8 pushrods
im sure there are some more things that i am missing but this is most of the parts. you dont have to have this exact list, but solid rollers require stronger parts and are a bit more expensive when compared to your typical hydraulic setup.
