LT1 Short Block in Texas *$225* + extra crank/rods/pistons
Thread Starter
Registered User
Joined: Feb 2005
Posts: 65
LT1 Short Block in Texas *$225* + extra crank/rods/pistons
I have a lt1 short block (2 bolt mains) with the crank/rods/pistons and main caps that came out of a 1995 z28 with ~65k miles. Good shape, just needs new bearings/rings and a hone. No spun bearings, no cracks!
$225 + shipping or you can pick it up fo' free!
I also have 8 rods/pistons and a crank that has been taken to machine shop and turned and ready to drop in (very very clean). The #8 rod needs to be resized, but the other 7 can take std bearings. These are also out of a different 1995 lt1 motor.
$75 + shipping or free pick up.
The crank cost $80 to just get turned.
$225 + shipping or you can pick it up fo' free!
I also have 8 rods/pistons and a crank that has been taken to machine shop and turned and ready to drop in (very very clean). The #8 rod needs to be resized, but the other 7 can take std bearings. These are also out of a different 1995 lt1 motor.
$75 + shipping or free pick up.
The crank cost $80 to just get turned.
Thread Starter
Registered User
Joined: Feb 2005
Posts: 65
Re: LT1 Short Block in Texas *$225* + extra crank/rods/pistons
NOT SOLD!!!! Buyer had a little trouble getting the cash together.
EVERYTHING FOR $275!!!
block, crank rods pistons, and an extra set of rods/pistons, and a perfect crank ready to drop in!
EVERYTHING FOR $275!!!
block, crank rods pistons, and an extra set of rods/pistons, and a perfect crank ready to drop in!
Last edited by tx_lt1; Apr 25, 2005 at 02:40 PM.
Registered User
Joined: Oct 2004
Posts: 319
From: Ottawa, KS
Re: LT1 Short Block in Texas *$225* + extra crank/rods/pistons
Originally Posted by tx_lt1
I have a lt1 short block (2 bolt mains) with the crank/rods/pistons and main caps that came out of a 1995 z28 with ~65k miles. Good shape, just needs new bearings/rings and a hone. No spun bearings, no cracks!
$225 + shipping or you can pick it up fo' free!
I also have 8 rods/pistons and a crank that has been taken to machine shop and turned and ready to drop in (very very clean). The #8 rod needs to be resized, but the other 7 can take std bearings. These are also out of a different 1995 lt1 motor.
$75 + shipping or free pick up.
The crank cost $80 to just get turned.
$225 + shipping or you can pick it up fo' free!
I also have 8 rods/pistons and a crank that has been taken to machine shop and turned and ready to drop in (very very clean). The #8 rod needs to be resized, but the other 7 can take std bearings. These are also out of a different 1995 lt1 motor.
$75 + shipping or free pick up.
The crank cost $80 to just get turned.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
11racing
Classic Engine Tech
0
Dec 26, 2014 05:40 PM
Decromin
Automotive News / Industry / Future Vehicle Discussion
4
Aug 18, 2002 10:11 AM
