ok this is gonna be a pretty good list so please bare with me on response time. Pics can be made available if requested...thanks in advance.. I prefer an email response cause then I can seperate everyone easier....


fast19cc@aol.com


-383 rotating with forged eagle crank, rods and forged JE pistons (-21 cc)
* crank needs to be turned .010, its standard now $800

-ceramic coated, tall center bolt aluminum valve covers(will clear alt. with small grinding to alt) these are bada** but wont work with my new setup $200

-stock Lt1 valve covers, make offer

-Harland Sharp full roller 1.5 ratio rockers $100

-trick flow hardened pushrods 7.50 x .080 (not stock length) $50
*were used on AFR 190's

-Stock oil pan clearanced for stroker, not pretty cause it was influenced with a hammer but will work... make offer


-custom grind comp cam for nitrous..hyd roller.. cam card available $100

-comp "R" series hi rev lifters $ 150

-stock 95-97 timing chain cover

-ARP main studs $50

-comp guide plates $ 30

-NIB nitrous works kit 75-175 hp plate kit $450

-vortech inline fuel pump $75


I have alot of other little stuff to that I didn't want to waste my time with listing but if u are in need of somthing small ask and I may have it.. ex. timing chain, sensors, etc....

ALL PRICES NOGATIABLE, but don't get stupid. everything u pay shipping or pickup.. I live about 30 min north of Ft Worth Tx in Boyd

thanks and here is my email again if u missed it at the top

fast19cc@aol.com

 

ttt, fuel pump is sold..

 

wow, still have everthing but the pump

 

Clear front corners? any 2 1/16th gauges? and if those valve covers will fit a stock LT1 i would like pics...... camaroracing12@hotmail.com

 

Details please. Are they used? Part #? They sale for that much new is why I was asking.
Thanks,
Steve

 

-custom grind comp cam for nitrous..hyd roller.. cam card available $100

Cam specs?
How many miles on cam and lifters?

 

Is the 383 a brand new motor relatively?

 

.583 / .540
230 / 242
114 LSA

around 5000 miles on the cam and lifters...

about the same on the rotating assy.

 

$25, they are used.. I got the price confused with my pushrods.. sorry

 

I got my fuel pump i bought. Looks great, just as decribed, and quick shipping too, thanks!
Dan

 

whats the part # on the NIB Nitrous Works system ?

 

13070 is the number on the box...go to Jegs.com and type that number into the search and the kit comes up...it is the Lt1 kit...

 

I did that on Jegs and it comes up with 3 kits. So it is not 13070-A or 13070-58. Right !

 

evening bump

 

is the rotating assy still un sold?