UPDATED
all parts are used! some prices are negotiable! most arent. dont try and low ball me, you will be ignored
IMO and i think most will agree...prices are VERY reasonable!!
any LT1 year specific parts you might be looking for in here are for '94-'97 (no/none '93 specific parts)
all prices are plus + shipping

SLP cold air $150, comes with stock elbow (filters are a little banged up and has slight (very minor) scratches in powdercoating that isnt visible when installed) will even throw in the MAF and stock intake elbow in good shape that i made a piece of wood too fit into the silencer opening

AS&M 54mm TB $325 (isnt a nicer TB for an LT1 on the market..anywhere) practically new, inculdes bolt but no 54mm gasket

SVO bluetop 36lb injectors (8) $125 (SOLD)

stock fully ported LT1 heads done by advanced induction (flow 272 @.600/191@.600) and custom grind cam from Lethal EFI (Joe Overton) 234/242....a steal @ $1500 (will not seperate its both or none, besides they were made for each other) comes with 3/8" ARP rocker studs and GM guideplates. have build and flow sheets for heads...might still have the cam card (SOLD)

Autometer pro series shift light. like new in excellent condition. includes 6,6.2,6.4,6.6,6.8 rpm shift pills and light cap $75

Comp cams 1.6 ratio non self aligning Pro Magnum roller rockers $225

Comp cams "R" series lifters part# 875-16 (these are the make before Comp started having problems with them) $125

CSI electric waterpump and waterpump housing (unbolt yours, and bolt this one on) $150. buy this and timing cover for $175

Cloyes True double roller timing set for '87 up roller block, $50


1 pair of custom made stepped 1 3/4"-1 7/8" headers ceramic coated in very nice condition...these came off of Dave Ducotes car (cost him $1300 too have made) which made ~1200hp and ran in the low 9's with a blower. have pics. all primaries have EGT ports these are VERY NICE headers $500,

OBD1 PCM tuned for my combo lots of pcm changes done too it. (SOLD)

Lt1 shortblock stock $500 (will not ship this) 86,000 miles will be ready too go shortly. includes oilpan, oil pump drive, oil pump

bare LT1 block $200 (will not ship this)
stock crank $75
stock intake, $50
stock HR lifters $50
stock lifter retainers and spider assembly $25
stock cam, i think '95 $10
stock TB, $25
stock valve covers, $25 (sale pending)
stock LCA's $5
stock panhard bar $5
stock OBD2 vented timing cover clearanced for Cloyes true roller and freeze plug installed for waterpump, $50
93-95 crank hub (a must when using true roller on OBD2 car) $50
AC delete pulley $50
also have LS1 lower radiator support cut open for the free ram air mod, $25
LT1 alternator used 80,000+miles $25 worked when pulled
LT1 accessory bracket...$75

probably have other stuff you might want also, just ask and i'll find out

again DO NOT try and lowball me, these are quality parts at very reasonable prices

Steve
thats it for now, i'm sure i'll think of more later
e-mail: last350 @ hotmail.com (remove spaces)
or PM me

 

Very intrested in the heads and cam.

pm sent.

 

how many miles on the injectors thanks

 

send pics of the headers im very interested....tonylittell@msn.com

oh yea and dibs....

thanks
tony

 

I am interested in your PCM what all mods have been completed on it. This would be most helpful and what you are looking to get for as well as if you have the wiring harness that would be helpful. Let me know thanks

 

roughly 12,000 miles

 

http://i1.ebayimg.com/04/i/04/ce/84/ab_1_b.JPG
http://i15.ebayimg.com/01/i/04/cd/9f/82_1_b.JPG

passenger side is all 4 primaries slip fit into the collector. driver side has 1 or 2 slip fit primaries (cant remember off hand)
i never had these on my car.

 

check pm, dibs on injectors...

 

LT1/T-56 wiring harness?

 

dibs on intake, please send pics to can0705@mail.ecu.edu

 

I sent you a email.

I'm very interested. Let me know if you don't get it

Thanks
Tom

 

"JamesLT1TA" has dibs on the injectors, pcm, heads and cam (practically sold too him)
everyone else who hasnt asked about those particular items, will get replies asap

Steve
i'll try and get pics of everything this weekend as i am still removing stuff from the car (right now, its only taken down too the lifter valley)

 

this is a possibility of being sold to you. but i'm not sure yet as i might still be using it
will be in touch with you if i dont!!

Steve

 

oustanding. definitely let me know if you don't use it.

thanks
Tristan

 

you sure that car of yours couldnt use a nice 54mm AS&M TB? $325 shipped