LT1 Parts -Vortech V1, T-56, Headers, Injectors…
Thread Starter
Registered User
Joined: Jan 2007
Posts: 97
From: Little Rock, AR
LT1 Parts -Vortech V1, T-56, Headers, Injectors…
I really wish I could keep all these parts (supercharger and t-56 especially) but I have to sell some to fund my ultimate project so if you need any additional information or pictures just ask.
*Note if you need any of the bolts for these items ask-I have most of them separated and labeled. I'm going to be completely honest about each part good or bad. Please don't waste my time if you're not serious or don't have the $$...thank you.*
LT1 T-56 swap- includes tranny, bell housing, cross brace, shifter (stock), hydraulic linkage (new but previous owner-6 months old), pedals (not pictured because still in car), and clutch/pressure/flywheel (6 months old) etc.
SOLD
LT1 4l60e swap %u0025u0025u2013 includes tranny, pedals, shifter, linkage, dipstick tube...tranny has shift kit and TCI 1-2 and TCI 3-4 servos installed...it was slipping prior to removal needs a new 3-4 clutch pack installed $350
Pacesetter longtube headers- SOLD
Comp Cam valvetrain-Comp Cam 1.52 Roller Rockers-Comp Cam pushrods-Comp cam poly locks (stock stud 3/8)- SOLD
Delphi 42lb injectors (8) part number %u2013 01d030b- (6 months old) SOLD
LT1 Vortech V-1 (I hate to use "full" kit because it depends on year and equipment you have but I pulled everything from car related to supercharger you will need a tune and possibly injectors for example)...
includes head unit (great condition no shaft play...was fairly quite compared to other vortech blowers I've heard), brackets, bolts, crank pulley, supercharger pulley (5-7 psi pulley 3.3% I believe), belt (see pic), intake side tubing with clamps (see pic), blow off valve, charge side tubing (includes upgraded Spectre brand filter and flexible tubing to allow relocated filter for cooler air- MAF NOT included), oil feed line, boost gauge (not shown but included) and T-rex inline fuel pump SOLD
LT1 starter (6 months old) - SOLD
Comp Cam 7/16 stud poly locks (8) ...$30 shipped
Opti - non vented (6 months old)... SOLD
Alternator - SOLD
Water pumped- SOLD
Brake fluid reservoir- $30 shipped
A/C delete pulley ... Sold
Stock TB - $25 shipped
Balancer-Sold
Corvette servos $20 shipped
LT1 fuel rails (no injectors included) ... $80 shipped
Gas cap - $10 shipped
Ported Intake SOLD
Ported heads SOLD
*Note if you need any of the bolts for these items ask-I have most of them separated and labeled. I'm going to be completely honest about each part good or bad. Please don't waste my time if you're not serious or don't have the $$...thank you.*
LT1 T-56 swap- includes tranny, bell housing, cross brace, shifter (stock), hydraulic linkage (new but previous owner-6 months old), pedals (not pictured because still in car), and clutch/pressure/flywheel (6 months old) etc.
SOLD
LT1 4l60e swap %u0025u0025u2013 includes tranny, pedals, shifter, linkage, dipstick tube...tranny has shift kit and TCI 1-2 and TCI 3-4 servos installed...it was slipping prior to removal needs a new 3-4 clutch pack installed $350
Pacesetter longtube headers- SOLD
Comp Cam valvetrain-Comp Cam 1.52 Roller Rockers-Comp Cam pushrods-Comp cam poly locks (stock stud 3/8)- SOLD
Delphi 42lb injectors (8) part number %u2013 01d030b- (6 months old) SOLD
LT1 Vortech V-1 (I hate to use "full" kit because it depends on year and equipment you have but I pulled everything from car related to supercharger you will need a tune and possibly injectors for example)...
includes head unit (great condition no shaft play...was fairly quite compared to other vortech blowers I've heard), brackets, bolts, crank pulley, supercharger pulley (5-7 psi pulley 3.3% I believe), belt (see pic), intake side tubing with clamps (see pic), blow off valve, charge side tubing (includes upgraded Spectre brand filter and flexible tubing to allow relocated filter for cooler air- MAF NOT included), oil feed line, boost gauge (not shown but included) and T-rex inline fuel pump SOLD
LT1 starter (6 months old) - SOLD
Comp Cam 7/16 stud poly locks (8) ...$30 shipped
Opti - non vented (6 months old)... SOLD
Alternator - SOLD
Water pumped- SOLD
Brake fluid reservoir- $30 shipped
A/C delete pulley ... Sold
Stock TB - $25 shipped
Balancer-Sold
Corvette servos $20 shipped
LT1 fuel rails (no injectors included) ... $80 shipped
Gas cap - $10 shipped
Ported Intake SOLD
Ported heads SOLD
Last edited by ws6_z28; Feb 25, 2011 at 08:32 PM.
Registered User
Joined: Jan 2008
Posts: 1,900
From: warren,michigan
Re: LT1 Parts -Vortech V1, T-56, Headers, Injectors…
What car did you run the vortec kit on?I have a 94 z28 lt1,just wondering if there would be anything else I would need,besides injectors..I already have a Walbro in tank fuel pump,so i dont think I would need the inline pump.
Thread Starter
Registered User
Joined: Jan 2007
Posts: 97
From: Little Rock, AR
Re: LT1 Parts -Vortech V1, T-56, Headers, Injectors…
uh oh...I guess what I found last night....
The tranny removal had a nice surprise...http://www.jegs.com/i/Ram-Clutches/7...oductId=751484
If someone is serious they better get it soon...my built 4l60e is about to be swapped out in my other car
The tranny removal had a nice surprise...http://www.jegs.com/i/Ram-Clutches/7...oductId=751484
If someone is serious they better get it soon...my built 4l60e is about to be swapped out in my other car
Registered User
Joined: Sep 2006
Posts: 14
From: LAREDO, TEXAS
Re: LT1 Parts -Vortech V1, T-56, Headers, Injectors…
How many miles on the blower? Also is it the high output system, because according to vortech that system won't work my 97's traction control. Thank you.