LT1 Parts For Sale!! 396ci, LTCC, Guages!!

Old Aug 30, 2004 | 05:57 PM
  #1  
ahale's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 88
From: Waycross, GA
Lightbulb LT1 Parts For Sale!! 396ci, LTCC, Guages!!

Hey,
I am parting out my car and putting my stock motor in it so I can sell it. First things are first, haleandrew is my user id for ebay, log on and check me out before talking to me so that you will know that I am a honest person! My cell phone number is 912-550-1400 and I will be accepting all calls about questions for my parts. These parts came out of a 1994 Z28 Camaro. I loved my car, but I have just bought a house and a new Bike (GSXr 1000) and I have just lost interest in this car. I will post my car, and the parts on ebay If I don't have any responses. I am located in Waycross Georgia and I will be glad to ship or might would even deliver, if not too far. Just feel free to call and talk to me about them.

Car:

1994 Chevrolet Camaro Z28...Car itself has 145000 miles on it. The motor has 60000 miles on it, I bought it off of ebay. Included with the motor I bought off ebay was the 6 speed that also has 60000 miles on it. Centerforce clutch, Hooker LT headers, LT1 Edit programming, Leather Interior, SS Spoiler, CORSA Exhaust, Hotchkis lowering springs, BMR SUBFRAME connectors, BMR Panhard bar, Anti squat brackets, and BMR Lower control arms. It also has 373 gears in it. This car runs very strong and there is noting at all wrong with it. I would like to get 6500 with the chrome ZR1's and LIKE NEW Good Year GSC tires (275-40-ZR17), but will discuss other cost with stock wheels.

Removed from the car are the parts listed below:

396 Stroker motor, 3000 MIles on it in perfect shape. Removed because I will not be able to sell my car for what I have got in it if I didn't remove it. Just the 396 Stroker kit was $2500 from combination motorsports. The motor was built by Dynamic Motorsports in Waycross Ga. Heads are stock, but it has a Decent size cam in it. The springs were matched to the cam. Canton 7 qt oil pan will also be included. You can view the parts on combinationmotorsports.com or you can call me and I will tell you all about it. The motor was internally balanced from Callies. I included Callies dragon slayer crank, Callies billet rods, and SRP Pistons. I would like to get 3900 for just the motor and the parts that are listed. I can tell you more about it in person.

LTCC Ignition system, I purchased this from bob bailey, the coils off of ebay, and the wires new. And the Fuel rail holders for the coils from MBA Products, I have over 1000 dollars in this system, But is has NEVER been used.

Fuel Pressure Guage, COBALT Series with electronic sender, part is 230.00 from summit, I will take 180.00 for it. IT is in perfect working condition.

Air/Fuel Ratio guage, Cobalt Series, Part is 50.00 From summit, I will take 35.00 Plus shipping for it. SOLD

30 Lbs Fuel Injectors, Bought new, Accell, Used for the 3000 Miles that the motor was ran. Would like to get 180.00 For them.

Adj. Fuel Pressure regulator, Bolt on for the stock fuel pressure regulator, used the same amount as the injectors. 40.00 for it.

Some of these prices are negotiable, just call me and talk with me. There will be some more parts too. I will add later on.

Thanks
Andrew

Last edited by ahale; Aug 31, 2004 at 04:27 AM.
Old Aug 30, 2004 | 08:37 PM
  #2  
mrz28 73/97's Avatar
Registered User
 
Joined: May 2004
Posts: 776
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

How much for just the LTCC control box I already have the coils and wires, let me know I'm Dale DCYZ28@aol.com.
Old Aug 30, 2004 | 08:42 PM
  #3  
dmoor88's Avatar
Registered User
 
Joined: May 2004
Posts: 1,754
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

can i get a pic of the A/F gauge?

dmoor88@hotmail.com
Old Aug 30, 2004 | 09:31 PM
  #4  
ahale's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 88
From: Waycross, GA
Cool Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

Emails sent.
THanks
Andrew
Old Aug 30, 2004 | 09:46 PM
  #5  
DuronClocker's Avatar
Registered User
 
Joined: Jun 2004
Posts: 379
From: Bloomingdale, IL
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

What kind of AFPR is it? I'm looking for one for my LT1 intake swap. I'm looking specifically for an Accel model, but if it is a different brand, give me a little info on it and a picture would be nice (holding it next to say a dollar bill or something for sizing purposes). Also possibly interested in the AFR guage if it is not spoken for yet (pic too if possible! ) Email to dean@xibase.com
Old Aug 31, 2004 | 12:02 AM
  #6  
dmoor88's Avatar
Registered User
 
Joined: May 2004
Posts: 1,754
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

never got it
Old Aug 31, 2004 | 08:59 PM
  #7  
ahale's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 88
From: Waycross, GA
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

Hey,
I now have got a spec Stage III Clutch that is for sale. IT is BRAND NEW, NEVER INSTALLED.
Just let me know,
THanks
Andrew
Old Aug 31, 2004 | 11:24 PM
  #8  
DuronClocker's Avatar
Registered User
 
Joined: Jun 2004
Posts: 379
From: Bloomingdale, IL
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

Originally Posted by DuronClocker
What kind of AFPR is it? I'm looking for one for my LT1 intake swap. I'm looking specifically for an Accel model, but if it is a different brand, give me a little info on it and a picture would be nice (holding it next to say a dollar bill or something for sizing purposes). Also possibly interested in the AFR guage if it is not spoken for yet (pic too if possible! ) Email to dean@xibase.com
Old Sep 1, 2004 | 11:44 AM
  #9  
NoFear95's Avatar
Registered User
 
Joined: Jul 2003
Posts: 409
From: Plainfield IL.
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

Stroker have a forged bottom end?

Price on the LTCC?
Old Sep 1, 2004 | 12:37 PM
  #10  
ahale's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 88
From: Waycross, GA
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

The Stroker motor is All Forged. I can send pictures of the build, the kit is the callies dragonslayer stroker kit that is on www.cmotorsports.com. It will also have a Canton oil pan (300.00), Moroso HV Oil pump with canton pickup. The cam was also purchased from cmotorsports and the part number is TN-233XR and the specs are 233/239 duration, .569"/.577", 111lsa. I have a video of my car and the way that it sounded, It was one bad bit**, and sounded better that any car that I have ever heard.

The LTCC, I would like to get 750.00 out of it. Like I said, it is BRAND NEW, Never USED. I Have over 1000.00 in it. 220 for the coils, 300 for the coil brackets, 400.00 for the LTCC kit, 50 for the wires.

Thanks
Andrew
Old Sep 1, 2004 | 04:36 PM
  #11  
NoFear95's Avatar
Registered User
 
Joined: Jul 2003
Posts: 409
From: Plainfield IL.
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

Would you seperate the heads? Or is it a complete package? Just interested in the shortblock.

Last edited by NoFear95; Sep 1, 2004 at 05:23 PM.
Old Sep 1, 2004 | 04:52 PM
  #12  
disco192's Avatar
Registered User
 
Joined: Apr 2004
Posts: 1,347
From: Austin/Houston, TX
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

Would you sell the motor and the clutch minus the heads?
Old Sep 1, 2004 | 05:20 PM
  #13  
DuronClocker's Avatar
Registered User
 
Joined: Jun 2004
Posts: 379
From: Bloomingdale, IL
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

Man can you please give me some more info on the AFPR? I'm interested in buying it if you can provide picture. The brand would help a lot as well..

Also, the AFR guage..
Old Sep 1, 2004 | 08:33 PM
  #14  
ahale's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 88
From: Waycross, GA
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

PM's sent to those interested.
Thanks
Andrew
Old Sep 1, 2004 | 09:28 PM
  #15  
bdc95ta's Avatar
Registered User
 
Joined: Oct 2003
Posts: 1,220
From: houston, texas
Re: LT1 Parts For Sale!! 396ci, LTCC, Guages!!

will you remove the exhaust from the car? if so I'll buy it.
-b

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:09 PM.