McCleod Street Twin less than 2k miles - $500 (no track passes or clutch dumps, mostly highway miles)
MSD Ignition box w/ blaster coil - $150
Phantom Electric Fuel Pressure Guage - $100
COMP-R lifters and hardened pushrods - $100
Red BMR tubular k-member, factory rack mounting, w/ integrated motor mount on the one side. - $300

ROH RT, w/ black ice finish (some curb rash, come with tires, but need replacment) - $500
http://www.jdwheels.com/images/ROH%20RT.jpg

I also have a set of LT1 heads that have 2.02 intake and 1.60 exhaust valves. They're ported and made 400 rwhp with an XE 236/242 on a 112 LSA. I just had the heads done 1500 miles ago and there's nothing wrong with them. They come assembled with Comp beehive valve springs, 10 degree locks and retainers. They also have new valve seals. The valvesprings are good to .700" lift. This will also come with the port matched intake manifold that was also ported for a 58 mm TB - $800 for all

Everything is located in Tucson, AZ. Prices do not include shipping.

Feel free to call if you have questions. 520-205-0081

Thanks,
Dustin

 

Rockers!!! PM sent.

 

pm sent

 

Got any pics of the valve covers? Will they clear Roller rockers? I am interested.
thanks!!

 

dibs on the clutch. just a few ?'s. What all comes with that clutch setup. is there a slave cylinder modification involved?
thx
Bryan

 

Clutch comes with flywheel, clutch disks, floater and necessary hardware to put it all together, you'll have to use your own flywheel bolts to bolt it to the motor, though. No mod to the slave was needed. Let me know quick, there has been a TON of interest.



I've responded to all of the PMs I recieved. If I can answer any more questions just let me know, I'd be happy to do so.

Thanks,
Dustin

 

pm sent on fuel pressure guage

 

I got pictures of all the parts yesterday. I'll upload them this afternoon and shoot them off to the email addresses that I have. If you have any more questions feel free to ask.

Valve covers are sold.

 

Let try this again. TTT

I edited the first post to reflect what I still have. I gotta make this stuff move, guys so help me out! I have pictures of most everything and can get whatever you might want. Feel free to call my cell (# is in first post) or shoot me a PM. You're more likely to get a faster response if you call me, though.

Thanks,
Dustin

 

TTT for the day!

 

is flywheel steel?
int or ext bal?

 

is the clutch up for sale still? Iceman8065@Yahoo.com

 

who ported the heads? Do you have any pics? jtb429@***.net

 

do you have pics on the k member??? fastal02@yahoo.com also what do you mean about the mount??? thanks