LT1 Over the axle true duals.
02-06-2008, 06:04 PM
#1
Registered User
Thread Starter
Join Date: Jan 2003
Location: Dobson, NC
Posts: 1,064
LT1 Over the axle true duals. (Price reduction)
Just as the title says, I have here a truely custom true dual setup dor a LT1 car. They are 2.5in thats got 2 12in bullets at the end.
[IMG]
[/IMG]
This car was lowered 1.5in all the way around and you could get a 12oz can under it anywhere. It gained 15RWHP and 25ftlbs, over a 3" catback. I had them mated to a set of SLP mid lengths, but with minor modification could be mated to any stock, shorty or mid length header/manifold.
Here is a sound clip.
Believe it or not this setup is very reasonably quiet when cruising around, but of course when you hammer it it gets pretty loud. There is 6 hours of fabrication, 10 feet of pipe and 2 chrome tips.
Ill take 375 obo for this setup.
I cant do shipping but ill drive an hour or so to meet you. Cana, VA (24317) is my location
[IMG]
[/IMG]This car was lowered 1.5in all the way around and you could get a 12oz can under it anywhere. It gained 15RWHP and 25ftlbs, over a 3" catback. I had them mated to a set of SLP mid lengths, but with minor modification could be mated to any stock, shorty or mid length header/manifold.
Here is a sound clip.
Believe it or not this setup is very reasonably quiet when cruising around, but of course when you hammer it it gets pretty loud. There is 6 hours of fabrication, 10 feet of pipe and 2 chrome tips.
Ill take 375 obo for this setup.
I cant do shipping but ill drive an hour or so to meet you. Cana, VA (24317) is my location
Last edited by my94blackz; 02-11-2008 at 12:48 PM.
02-07-2008, 06:18 AM
#5
Registered User
Thread Starter
Join Date: Jan 2003
Location: Dobson, NC
Posts: 1,064
Its $425, and yea I dont know where goochland is but if he is near 24317 ill meet him somewhere. These are the real deal for duals guys. These doesnt give the annoying drown like the ones dumped at the axle.
03-02-2008, 08:36 AM
#14
Registered User
Thread Starter
Join Date: Jan 2003
Location: Dobson, NC
Posts: 1,064
No sorry I wasnt planning on parting the car so I didnt snap many pictures. But these are a work of art. Ground clearence is excellent. you can remove the tranny w/o dropping the exhaust, also u can change the starter w/o dropping the exaust. I can get you pictures of it off the car.