k heres the deal, I am not big on going fast anymore and just want to cruise my car. I have thousands of dollars sitting in the garage rotting, here is a tenative list but more that likely if u want to go fast i have it or have something better. Trade for stock or semi stock parts will be heavily considered with some cash thrown in of course.


396 solid roller long block with badass everything... heads flow 332

9" rear with alum center section with 31 spline axles and 3.90 gear

Built TH 400 with convertor, shifter, cable etc

Nitrous works plate kit

twelve way adjustable fronts and rear shocks

that covers all the major things and I know that is real short on detail. If your interested email me at fast19cc@aol.com. please email cause I check it more often than getting on here.

Thanks
Cody

 

so pm me a price and a location for the rear

 

hi i am building 2 new lt1 motors, so i dont need my old one if you are interested i would be willing to trade my whole motor for some performance parts depending on what you have. i need headers , y-pipe,injectors,1.6 rockers,possibly heads,valve covers(other than stock),valvetrain,ram air intake,ect... anyways if intersted let me know what youve got and i will trade for a few things thanks. j77taboss@aol.com


http://www.camaroz2try 8.com/forums/showthread.php?t=575570

 

Though you are under the 50 posts needed to sell items on the forum...

I'm interested in the 9" PM me price/location. I can cough up a rear to replace yours.

 

what exactly are the rear shocks & how much for them shipped to toledo ohio?

 

Shoot me a PM on what teh front shocks are and how much, Pics wopuld be nice if you have some.
devine@scrtc.com

 

Pics of the plate kit to TJ_383ci@yahoo.com plz

 

how mcuh for the shocks? how many miles are on them?

 

where are you located?

 

azle, tx..just north of Ft worth if your not familiar with it.

 

how about some prices so the rest of us dont have to guess

 

what sized injectors do you have and what brand?

 

I figured if anyone was intersted they would pm for price because none of these numbers are locked in and I am open for trade with other less extreme parts. Particularly a 10 bolt and a M6 and clutch.

$3500 for the 396. intake to oil pan..

1500 for the 9"

1000 for the TH 400,convertor, shifter, and cable

500 for the QA1 12 way shocks

250 for the Nitrous works kit

I also have a 383 rotating, eagel crank, rods and SRP dish pistons $700

Tall alum center bolt, ceramic coated valve covers. $150

Digital RPM activated window switch.. $50

I think I do have some 50 lb holley injectors, not sure on price

26 x 11.50 x 16 et streets, 1/2 or better tread.. $150

coil per cylinder conversion ignition with all coil packs... $300



these are without shipping and trades will be heavily consider if u have something that I want. thanks and I hope this helps .i am sure there is some more things also so if your looking for something ask and I will see what i have.

Thanks
Cody

 

on the shocks that price is for front and rear with 300 lb springs on the front coil overs. I do not have rear springs, i was running stock in the rear

 

Would you be willing to seperate the front and rear shocks? I was interested in the fronts and the springs? How much would you be looking to get if you were willing to seperate and roughly how many miles do they have? Thank you.