Black powdercoated PA Racing tubular K-member (mild steel) setup for stock LT1 motor mounts and stock steering rack, dropped 3/4" and cleared my Canton Road Race pan.

$389 new Asking $310 SOLD!!!

__________________________________________________ ______________

Black powdercoated PA Racing tubular lower control arms (front suspension) (mild steel) with ball joints (about 10,000 miles on the balljoints and heim joints. These arms also lower the front of the car an additional 1.5" I believe.

$369 new Asking $290 SOLD!!!


__________________________________________________ ______________

STILL AVAILABLE!!!

Thunder Racing Line Lock "kit" for LT1 Camaro. Comes with Hurst Roll Control (line lock), pre bent lines. You provide a relay and micro switch, or heavy duty switch, some wire and your good to go.

Similar install, but of course this is a picture of an LS1.

Thunder Racing Line Lock

$215 new Asking $150 NEW PRICE $140 (can install and wire up for additional)



__________________________________________________ _______________


Canton LT1 Road Race pan 15-244T with Canton pickup 20-023

Canton Oil pan new = $329.00 Asking $250
Canton Oil pump pickup new = $37.50 Asking $25

Pan and pickup MUST go together for $275. SOLD!!!

__________________________________________________ _______________

LT1 Hooker Super Competition Long Tube headers (with ONLY O2 bungs, no AIR or EGR hookups) in Sterling Silver Jet Hot coating. Some scrapes and scratches, but in VERY good shape. No dings or dents on the bottom. Will include 3/8" x .75" long ARP stainless 6 point header bolts ($20 value.)

$689.99 new Asking $450 NEW PRICE $400

Mufflex Y-pipe for Hooker LT1 Long Tube headers. Good shape, no dings/dents. Discolored and had a plastic bag melted to it. Comes with the appropriate stainless band clamps. TRUE dual 3" pipes into a flowmaster dual 3" into single 4" outlet. NO restrictions here.

$249.99 New Asking $200. SOLD!!!

__________________________________________________ ________________________________

NEW STUFF!!!

Mufflex 4" catback for Mufflex Y-pipe. Single 4" exit on the driver's side. Comes with a Flowmaster muffler and a Borla XR1 muffler.

$575 for exhaust with both mufflers.

$551 new from Mufflex with Flowmaster, $400
$282.95 new from Summit Racing, Borla XR-1 Muffler, $175





All parts located in Lincoln, CA 95648 (near Sacramento, CA)

Shipping will be added to above prices if we cannot meet up.

Brian (707) 480-7275

 

i'll take the oil pan and pump and pickup. pm me with how i can pay you. also do you have any pics of it? pump new?

 

may actually take the line lock too if we work out something. pm me though so we can talk

 

Everything I posted is used, but in good/working condition.

I will have to wait untill later this week (Thursday/Friday) for the machine shop in NC to recieve the engine, and then tear it down and clean it up. I can have them ship directly for time savings though.

I do take PayPal as well.

 

money order work for you? whats the best you can do on what i want? send me a pm. i'm in va so shipping will be real cheap.

 

So that is a total of $450 before shipping.

How about we figure shipping on $30 and I'll split that with you and eat whatever goes over that.

I'm sure the line lock and lines will cost $10+ to buy a box and send it to you.

The oil pan, pickup and pump should cost probably $20+ to get to you (larger box and weighs more... but VA to NC is much closer then CA to VA.)

Money order will work fine if the above deal sounds good to you.

$465?

 

Brian,

I'll take that k-member off the car. Please let me know shipping costs to 18951. I can paypal you the money immediately.

Thanks,


Steve.

 

Im interested in the headers and y pipe. email me at tekkentagmaster@hotmail.com

thanks

 

Brian,

Money sent for the k-member and a-arms. Your PM box is full.

Thanks,


Steve.

 

Can i have pics of the mufflex y-pipe? Send to trans9_5am@yahoo.com

Brandon

 

K-member an A-arms are sold. Shipped today.



I'll try to get pics of the y-pipe...

 

Also would like some pics of the ypipe.

gundamscythe7@yahoo.com

thanks!

 

4" Mufflex catback exhaust system also for sale.

Comes with 4" intermediate pipe, 4" over axle pipe, 4" in/out Flowmaster muffler (brand new, never used), 4" custom outlet tip (hidden behind bumper with removeable 2.5" sound reducer in the tip) and all neccessary clamps (stainless steel band clamps.)

Also have 4" in/out Borla XR1 muffler


Mufflex 4" catback with brand new Flowmaster muffler ($551 new price from Mufflex.) $400

Mufflex 4" catback with both Flowmaster and Borla XR1 muffler (PN 40080 cost new at Summit Racing $282.95) $575.

Mufflex 4" catback with Mufflex Y-pipe with Flowmaster muffler $550

Mufflex 4" catback with Mufflex Y-pipe with both Flowmaster and Borla mufflers $750

Mufflex 4" catback with Mufflex Y-pipe and Hooker LT headers (Jet Hot coated) with Flowmaster muffler $950

Mufflex 4" catback with Mufflex Y-pipe and Hooker LT headers (Jet Hot coated ) with Flowmaster and Borla muffler $1,150

Borla XR1 Race Muffler PN 40080 4" in/out 16" case length $200

Hooker LT headers (Jet Hot coated) with O2 bungs $450 ($689 new)

Mufflex Y-pipe $200 ($250 new)


All prices NOT including shipping/boxing/packaging.

Headers come with polished 6 point ARP header bolts 3/8" bolt, 3/8" wrench head, 3/4" long.

 

You get that oil pan back yet? Im interested.

 

Don't need it back. I have have the machine shop in North Carolina ship it for me... Save on shipping too.

It is ready to ship though... the motor has been disasembled.

Brian