LT1 ETP heads, BRE Turbo cam, and supporting valvetrain components
Thread Starter
Registered User
Joined: Dec 2004
Posts: 92
From: milford,ohio
LT1 ETP heads, BRE Turbo cam, and supporting valvetrain components
Up for sale is the top half of my LT1 motor, everything was assembled but never ran. So everything is brand new.
The heads are ET performance CNC ported LT1 casting, they flow 285 CFM at .750 lift on the intake side and 206 CFM at .750 lift on the exhaust side, port volume is 207cc on the intake. The heads have 58cc combustion chambers and use rev-hard racing valves (2.02 intake and 1.60 exhaust). The heads are equipped with PAC racing beehive springs they%u2019re comparable to 26918 Comp Cams but Bret Bauer suggested the PAC brand and Comp Cam titanium locks and retainers. The heads have 7/16th ARP rocker studs and have Comp Cam Pro Magnum Rockers on them.
The cam is a roller and designed for these heads and was made with the intention of making 1000wrhp with a turbo 355; obviously it can also be used with other turbo builds. Cam was purchased through Bret Bauer of Bauer Racing Engines; specs are 22x 23x, cam card will be provided to buyer.
I also have new PBM roller lifters; Cloyes billet true double roller timing chain (9-3545x9 PN), and Canton LT1 aluminum valve covers.
I will sell everything together for 2500, after a week I will begin to separate with the following prices everything is plus shipping. I have the original boxes for everything but the lifters. Contact Corey Luman at crluman@gmail.com.
Heads with hardware(minus rockers) 1500 obo
Rockers & ARP studs 250
Cam 350
Lifters 350 (lifters will work ls1 and other sbc)
Timing set 60
Valve Covers SOLD
The heads are ET performance CNC ported LT1 casting, they flow 285 CFM at .750 lift on the intake side and 206 CFM at .750 lift on the exhaust side, port volume is 207cc on the intake. The heads have 58cc combustion chambers and use rev-hard racing valves (2.02 intake and 1.60 exhaust). The heads are equipped with PAC racing beehive springs they%u2019re comparable to 26918 Comp Cams but Bret Bauer suggested the PAC brand and Comp Cam titanium locks and retainers. The heads have 7/16th ARP rocker studs and have Comp Cam Pro Magnum Rockers on them.
The cam is a roller and designed for these heads and was made with the intention of making 1000wrhp with a turbo 355; obviously it can also be used with other turbo builds. Cam was purchased through Bret Bauer of Bauer Racing Engines; specs are 22x 23x, cam card will be provided to buyer.
I also have new PBM roller lifters; Cloyes billet true double roller timing chain (9-3545x9 PN), and Canton LT1 aluminum valve covers.
I will sell everything together for 2500, after a week I will begin to separate with the following prices everything is plus shipping. I have the original boxes for everything but the lifters. Contact Corey Luman at crluman@gmail.com.
Heads with hardware(minus rockers) 1500 obo
Rockers & ARP studs 250
Cam 350
Lifters 350 (lifters will work ls1 and other sbc)
Timing set 60
Valve Covers SOLD
Last edited by gemballa996; May 1, 2011 at 09:02 PM.
Registered User
Joined: Mar 2002
Posts: 203
From: CT
Re: LT1 ETP heads, BRE Turbo cam, and supporting valvetrain components
hey man, can you email me the part # on the rockers, glocklimited9@aol.com Thanks!
