May Update - Taking offers on anything, posted lower prices.

All parts are from a 1995 LT1 Trans Am, 140k miles when is quit running due to wear on a cam lobe. Everything is disassembled and unless it is a small part I'd prefer local pickup or delivery. Everything is located in Sanford, FL.

Block - $125



Crankshaft - $60 (needs threads for hub cleaned out)


Stock Pistons - $20 for 8


LT1 Waterpump - Remanufactured unit installed 500 miles before death - $ 65
LT1 vented optispark - worked good until the engine problems - $30
(SOLD) Set of Plug Wires - $15
LT1 Intake manifold without throttle body - $100 (fuel rail available below, $40)
(SOLD)LT1 Cylinder Heads (643 Casting) Valves still in, everything else removed. - $200
LT1 stock exhaust manifolds, Y-pipe, Cat, cat back - I’d like to keep the tips though - $60
LT1 oil pump - $15
LT1 oil pan - $20
Lifter tray/spider with clips/retainers - $20
LT1 radiator - $35
(SOLD) Coolant overflow container - $20
LT1 cooling fans - $30
Stock intake elbow, not ripped, with silencer - $50
(SOLD) K&N Intake system w/ cone filter - $40 (edit: filter is pretty dirty, may want to replace)
LT1 Mass air flow sensor - no screen- $50
LT1 ignition coil - $10
LT1 fuel rails - $40
LT1 fuel tank with pump - $50

Other pictures can be seen here: http://evtransam.com/pictures/
and here: http://evtransam.com/engine-disassembly/

PM me if you are interested in anything or want to work a deal for several of the parts.

Mike

 

Ill take the K&N Filter system with cone,
Dan

 

Also do you know the casting number on the heads?
lmk,
Dan

 

looks to be the 561's from this pic
http://evtransam.com/wp-content/uplo...11/topend2.jpg

compare in this thread.
https://www.camaroz28.com/forums/sho...d.php?t=427346

some decent stuff for sale though. do you have the dust shield for a m6 car? thought i saw it in a pic...

 

Interested in shipping just the exhaust manifolds to 91362? And how much...?

 

Actually the casting number ends in 643. Maybe there was a little overlap during 95 production?

Do you mean the cover for the steering rack? I'll need to hang on to that.

Mike

 

Sure if you want them. I checked to see if they'd fit separately in the largest priority flat rate box but they won't. Parcel Post should be about $40-50 so it may not be worth shipping from Florida.

I just checked them out and one bolt sheared off on both the passenger and driver's side where they bolt to the y-pipe. One bolt on the driver's side is also missing so they'd need those replaced.

I don't figure they're worth much and that you want them for the CMC, which sounds pretty cool. I'll send them your way for $40 plus shipping, so probably $80 either UPS or USPS.

Mike

 

 

Hey...do the pistons include the rods for 25 if so I'll take them if you take paypal..I'm interested in the Piston and Rods and the Coolant overflow container/ battery tray and the Cat back itself with the tips I know you want 100 for the whole exhaust but I just want the catback with tips gimme a price...If the guy dont want the K&N Intake system I'll take that too...
Pistons & rods
K&N Intake system
Cat back itself with the tips
Coolant overflow container/ battery tray
shipped to 78521
thanks
jlo

 

Sure, I'll include the rods with the pistons. The K&N is sold, and shipping the exhaust would be $75+, assuming I cut it in pieces so I'd rather not ship the exhaust.

Pistons & rods - $25
Coolant overflow container/ battery tray $20
shipped to 78521 from 32771, assuming 30 pounds - $35

Total of $80 shipped.

Mike

 

Ok, that makes more sense since you specified a M6 car. I think it bent some near the starter hole during removal, you can see it a little in the picture. I'll look for it and see if I'm remembering correctly and PM you. If it looks ok you can have it.

Mike

 

I can pay-pal you tomorrow...what's you're address for pay-pa? does the coolant over flow has all the stuff to bolt it on?

 

K&N and Coolant tank sold, everything else still available.

Mike

 

you got pics of the fuel tank? How much for shipping to S.A. texas?

 

UPS Ground is about $190 shipping, so near $300 total. Probably not worth it, sorry.

Mike