LT1 ARP 12-point head studs, 1.6 roller rockers, heads, etc....
05-06-2013, 07:26 PM
#1
Registered User
Thread Starter
Join Date: Jan 1999
Location: Rochester, NY USA
Posts: 3,051
LT1 ARP 12-point head studs, 1.6 roller rockers, heads, etc....
ARP LT1 12-point head studs from my previous motor, used once, ARP part number 234-4601, excellent condition, no missing bolts or washers. SOLD
GMPP 1.6 roller rockers, complete set with nuts/poly locks, a couple of them have some wear on the self-aligning tabs, and one rocker has an area at the tip where the aluminum body has an indentation from what looks to be wear/rubbing against something. It was like that when I bought the car, and the car ran perfectly. SOLD
SFI LT1 flexplate, 153 tooth, great shape $30
LT1 flywheel, never resurfaced or re-balanced. Just as it came from the factory. Wear is very minimal, but there is some light surface rust. All threaded holes are in excellent condition. $40
643 LT1 heads, assembled and in great shape. Removed from a 7x,000 mile vehicle, resurfaced about 2k miles ago (very light cut, .006"). Very nice heads for replacement or cores for porting. $150
LT1 intake manifold, stock and unported, 94-97 style $40
GMPP 1.6 roller rockers, complete set with nuts/poly locks, a couple of them have some wear on the self-aligning tabs, and one rocker has an area at the tip where the aluminum body has an indentation from what looks to be wear/rubbing against something. It was like that when I bought the car, and the car ran perfectly. SOLD
SFI LT1 flexplate, 153 tooth, great shape $30
LT1 flywheel, never resurfaced or re-balanced. Just as it came from the factory. Wear is very minimal, but there is some light surface rust. All threaded holes are in excellent condition. $40
643 LT1 heads, assembled and in great shape. Removed from a 7x,000 mile vehicle, resurfaced about 2k miles ago (very light cut, .006"). Very nice heads for replacement or cores for porting. $150
LT1 intake manifold, stock and unported, 94-97 style $40
Last edited by Jason Short; 05-13-2013 at 08:03 PM.
05-07-2013, 08:43 AM
#4
Registered User
Join Date: Dec 2011
Location: Tollesboro, KY
Posts: 178
Re: LT1 ARP 12-point head studs, 1.6 roller rockers, heads, etc....
Jason two questions for you. Are these the narrow body rockers? Also can they be used utilizing with stock style valve covers? Also are these sefl aligning? Thanks!
Dave
Dave
Last edited by 97Z4CZ28; 05-07-2013 at 08:48 AM.
05-07-2013, 04:31 PM
#6
Registered User
Thread Starter
Join Date: Jan 1999
Location: Rochester, NY USA
Posts: 3,051
Re: LT1 ARP 12-point head studs, 1.6 roller rockers, heads, etc....
They are the ones that come with the LT4 HOT cam kit. Self aligning and made to work under the stock style valve covers. You might have to trim the internal supports some. Thousands of people have used them with stock style valvecovers for years.
05-12-2013, 08:10 AM
#10
Re: LT1 ARP 12-point head studs, 1.6 roller rockers, heads, etc....
i want the heads and the intake and the studs
email me almarji13@gmail.com
email me almarji13@gmail.com
Last edited by yanal_13; 05-12-2013 at 08:23 AM.
05-13-2013, 08:49 AM
#11
Registered User
Join Date: Jan 2005
Posts: 22
Re: LT1 ARP 12-point head studs, 1.6 roller rockers, heads, etc....
i want the heads and the intake and the studs
email me almarji13@gmail.com
email me almarji13@gmail.com
05-13-2013, 08:53 AM
#12
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
02-09-2016 09:21 PM