ZKrazed

Since I am replacing my Lt-1 with a new engine I figure I don't need it anymore so if anyone is interested in the entire engine itself or certain parts off the engine let me know. I have 153,000 miles on the engine itself, the rear main seal had a slight leak, and I had to add oil to it about everything 1,500 miles. I am pretty sure the bearing itself is shot as well, so this engine would need to be rebuilt before using, or at least I would highly recommend it considering the mileage, the rear main seal, and the bearing problem.

I do have MSD 8.5mm Super Conductor Wires, a stock K&N airfilter, stock rear spoiler (white), and 4 white 30'th anniv. rims (would recommend for use only as track rims as there is some curb rash and 2 are bent slightly). If you are interested in the engine or any parts from it or above, let me know. I also have a junked 93 V6 Camaro, white, that can be used as parts. Ask if you are interested in anything. Thanks.

Evan
Zkrazed@yahoo.com
Pikapei549@aol.com

zektor_sc

How much for the oil pan? If your willing to part with it let me know at jmballesteros@ucdavis.edu and send a pic of description. Thanks

89305rs

I need two bolts that hold on the distributer and timing cover and two that hold on just the timing cover as well as the steam tube that rus along the back of the heads and goes to the throttle body. Please let me know if you could spare these items. And a price shipped to zip 61265

sprayedtransam

Complete heads and intake??? How much do you want for them?

ZKrazed

All bolt on parts to the long block I need. However I am gettin rid of my power steering pump, my waterpump which has around 50,00 miles on it, my opti-spark which I have not replaced while I have owned the car (153,000 miles, 80,000 from me).
The heads I will sell ya for $100 plus whatever shipping may be. I need to keep the intake manifold for my new engine sorry. However if you want to make an offer for the intake and heads I am game.

Evan

sprayedtransam

I will take those heads for $100 plus shipping. Let me know the total to 79088, its a business address...Thanks.

sprayedtransam

I would throw in another $100 for the complete intake if you want to. Let me know if you want to keep it or sell it...

ZKrazed

The shipping charge for a guesstimated weight of 150lbs, for the set of heads plus the intake manifold is $116.00. This is UPS Ground. When you say the complete intake do you want the elbow and intake itself? I need both of those for my engine, however I will sell you the manifold and the heads to you for $200 plus the shipping expense of $116. So $316 for everything. I am gettin my heads taken off today as well, the manifold is already off the car and the engine should be pulled in the next hour or so. I can get a correct weight once this is finished, but that cost is prolly about right for everything. Let me know.

Evan

Drakar

how much for the block shipped up to 98230 (Blaine Washington)

short block that is.

Loadre

Using regular UPS ground my heads' shipping was $25 dollars from the local UPS Store.

Fastlane96lt1

how well is the 93 v6 body wise...lookin for hood and drivers side rear 1/4 panal???