Ls1 Front Brake Conversion/Front End Rebuild Kit W Poly bushing
#1
Ls1 Front Brake Conversion/Front End Rebuild Kit W Poly bushing
For sale is complete LS1 front brake conversion. It includes
Front Spindles
Front Hubs
Front Calipers+Brackets
Front Brake Lines
Front ABS Sensor Harness's
Brand New Bendix Ceramic Pads
Brand New Slotted Rotors
All Spindles and calipers were sand blasted degreased + wire brushed and painted with high temp paint black and calipers sprayed with dupli-color caliper paint. Paint is not perfect anymore because it has been sitting in garage-But never installed
Also with kit comes with front end rebuild kit from ebay i believe its napas cheaper brand-(i have this same kit installed on my car now for the past 2 years not problems yet was going to swap everything when i did conversion since i was going to be there anyway)
Upper+lower ball joints
Inner+Outer Tie rods
Possibly sway bar links i can double check
Also have a prothane front end poly bushing kit in black brand new for control arms
Shipping on this stuff will be around 125 depending on where its going and that may even be on the low end spindles are heavy as well as rotors plus boxes are big so please no low ball offers--- IM ASKING 750 Shipped for everything- It probably will be two or more packages--- I will not split up unless i have interest in everything--- I except paypal only and buyers must add 3% for fees
Front Spindles
Front Hubs
Front Calipers+Brackets
Front Brake Lines
Front ABS Sensor Harness's
Brand New Bendix Ceramic Pads
Brand New Slotted Rotors
All Spindles and calipers were sand blasted degreased + wire brushed and painted with high temp paint black and calipers sprayed with dupli-color caliper paint. Paint is not perfect anymore because it has been sitting in garage-But never installed
Also with kit comes with front end rebuild kit from ebay i believe its napas cheaper brand-(i have this same kit installed on my car now for the past 2 years not problems yet was going to swap everything when i did conversion since i was going to be there anyway)
Upper+lower ball joints
Inner+Outer Tie rods
Possibly sway bar links i can double check
Also have a prothane front end poly bushing kit in black brand new for control arms
Shipping on this stuff will be around 125 depending on where its going and that may even be on the low end spindles are heavy as well as rotors plus boxes are big so please no low ball offers--- IM ASKING 750 Shipped for everything- It probably will be two or more packages--- I will not split up unless i have interest in everything--- I except paypal only and buyers must add 3% for fees
Last edited by Lt1son; 01-18-2012 at 07:49 AM.
#3
Re: Ls1 Front Brake Conversion/Front End Rebuild Kit W Poly bushing
lmfao... you know LS1 brake swaps usually sell for like 150 bucks right? You can get these parts off any 98-02 F body, even a V6. For what you're asking you can buy a full C5 Corvette brake conversion package.
#4
Re: Ls1 Front Brake Conversion/Front End Rebuild Kit W Poly bushing
Thread
Thread Starter
Forum
Replies
Last Post
Hurin
Suspension, Chassis, and Brakes
4
12-13-2014 07:38 PM
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 05:00 PM
Wilson
Car Audio and Electronics
0
07-21-2002 05:08 PM