Lotsa LT1 parts also 4th gen Camaro body parts
#1
Taking the kids to Disney!! Need to sell these LT1 parts, LOWER PRICES
Ok here goes. My motor went so I decided to part out my car
Pro built 4L60E Stage 2, Only like 2000 miles on it. Bought from another member just before the engine went. Deep chrome pan, Vacuum modulated, very clean, Already strapped to a pallet. $750 shipped
Stock 4L60E, 70K miles, Shifts good. $440 shipped
Jet hot coated LTs with custom Y-pipe, Coating coming off and a couple of dents on the bottom. Jet hot will recoat them for free if you pay shipping to them. $300 shipped
Tuned OBD2 PCM for bolt ons and 3200 stall and 3.73s. Ran 12.27 all motor with this PCM. $130 shipped
BMR driveshaft loop, Red $60 shipped
Used LT1 heads, Home port matched, complete. $165 shipped
Used stock bottom end. 85k needs rebuilt(rod knock), $160 shipped
Stock rear with 3.23s, SS rear cover, complete with brakes, no noises at all, will not ship. $240
96 Z dash with cluster ??
Drivers and passenger doors ??
Harwood ramair hood for Camaro, Bolt on, was damaged but is fixed now, cannot see damage on the outside, WILL NOT SHIP. $200
Rear hatch w/ glass and stock wing ???
Airbags ???
Leather seats, dark gray, rip in drivers bolster, $240 PLUS SHIPPING
Console Auto, Complete and not broken, $95 shipped
Drivers fender, aftermarket ???
Front bumper, aftermarket, some indentations at bottom ???
Lots of other misc. stuff JUST ASK..
Pro built 4L60E Stage 2, Only like 2000 miles on it. Bought from another member just before the engine went. Deep chrome pan, Vacuum modulated, very clean, Already strapped to a pallet. $750 shipped
Stock 4L60E, 70K miles, Shifts good. $440 shipped
Jet hot coated LTs with custom Y-pipe, Coating coming off and a couple of dents on the bottom. Jet hot will recoat them for free if you pay shipping to them. $300 shipped
Tuned OBD2 PCM for bolt ons and 3200 stall and 3.73s. Ran 12.27 all motor with this PCM. $130 shipped
BMR driveshaft loop, Red $60 shipped
Used LT1 heads, Home port matched, complete. $165 shipped
Used stock bottom end. 85k needs rebuilt(rod knock), $160 shipped
Stock rear with 3.23s, SS rear cover, complete with brakes, no noises at all, will not ship. $240
96 Z dash with cluster ??
Drivers and passenger doors ??
Harwood ramair hood for Camaro, Bolt on, was damaged but is fixed now, cannot see damage on the outside, WILL NOT SHIP. $200
Rear hatch w/ glass and stock wing ???
Airbags ???
Leather seats, dark gray, rip in drivers bolster, $240 PLUS SHIPPING
Console Auto, Complete and not broken, $95 shipped
Drivers fender, aftermarket ???
Front bumper, aftermarket, some indentations at bottom ???
Lots of other misc. stuff JUST ASK..
Last edited by 10sec87IROC; 10-15-2006 at 07:29 AM.
#5
Re: Lotsa LT1 parts also 4th gen Camaro body parts
i only need the plug with some wire on it...the way its wired now is that the wires directly tap right into the light bulb itself so its jimmy wrigged...if u got that plug that would b awesome
#6
Re: Lotsa LT1 parts also 4th gen Camaro body parts
ill take the airbags..email me at gregory.garrison@comcast.net
#10
Re: Lotsa LT1 parts also 4th gen Camaro body parts
VERY INTERESTED in the pro built tranny. i was wondering if u have any further info on it and what member u bought it from. Also is ur price pretty firm or ???? thanks
#11
Re: Lotsa LT1 parts also 4th gen Camaro body parts
JooneJune, What is your question???
serpentbmf, The trans was built by LT1 Dave. I cant get back to the old classified section to get the guys name that I bought it off of while I am at work. I will get his board name later today. If you go to LT1 Dave's website (LT1Dave.com) it tells you all the particulars on the trans. I never got a chance to put it in my car. Also I am somewhat firm on the price because I paid $1350 shipped for the trans and a vig converter and then I sold the vig for $500 so I am still gonna lose about $150 on the deal cause it is gonna cost $100 to $125 to ship it.
serpentbmf, The trans was built by LT1 Dave. I cant get back to the old classified section to get the guys name that I bought it off of while I am at work. I will get his board name later today. If you go to LT1 Dave's website (LT1Dave.com) it tells you all the particulars on the trans. I never got a chance to put it in my car. Also I am somewhat firm on the price because I paid $1350 shipped for the trans and a vig converter and then I sold the vig for $500 so I am still gonna lose about $150 on the deal cause it is gonna cost $100 to $125 to ship it.
#12
Re: Lotsa LT1 parts also 4th gen Camaro body parts
thats what i needed to know, but one more question now. If this is the stage 2 trans, how is it vaccuum modulated if that is only offered on the stage 3 by him. Is it actually the stage 3 or did someone else apply that.....sorry for all the questions but i was screwed on my last "built" tranny i bought off here...who knew built trannys only last a year
#13
Re: Lotsa LT1 parts also 4th gen Camaro body parts
I was told it was a stage 2 and it is marked by LT1 dave so I know it is from him. It is definitely vacuum modulated though because there is a vacuum piece coming out right behind the plug for the harness. As far as being screwed on a built trans. I bought one off ebay and it was supposed to be harecore built and have very hard shifts and when I put it in my car it shifted stock and lasted only 3 months!!!! Needless to say I was pissed. So this time around I did my homework and I feel this trans is good to go. I hope this info helps.
Scott
Scott