383 short block all new

-SRP/JE forged flat top pistons about 11:1 comp with 64cc heads
-Internal balance
-Lt1 block .030 over
-Miloden splayed 4 bolt mains line bored
-Cola 3.75 4340 forged crank
-Eagle 6" ESP forged rods
-Total seal Gapless rings
-Canton oil pan, pick up, etc plus oil pan gasket
-All ARP bolts
-Cloyes double roller timing chain
-Race coated Federal Mogul Main and Rod bearings

3500.00 obo and please add an optional 150.00 for a CC306 cam with 7,000 miles on it.

Nitrous wet kit
-shark nozzle
-various jets
-fuel and nos solenoids
-feed line plus schrader to fuel solenoid line and then solenoids to nozzle lines
-15# bottle with a press gauge that is tapped in so you can read the pressure at all times
-NOS bottle heater
-NOS purge kit with all lines, etc and all fittings
-various other lines and fittings, etc plus all switches
-this kit will come complete with everything
-750.00 shipped for all

Weld pro stars
-15x8's on the back with 28x10x15 hoosiers
-15x3.5's on front with cheap brand name tires with a lot of tread left
back tires have about 60-75 % tread left and fronts about 75%
The rims are in decent shape but could use a polish job but Im too lazy to do it Sorry no pics but buyer can come check them out in person.
make offer

9006-9005-9004-9007-894-893 eurodezigns blue xenon headlights 5200k

15.00 shipped for each pair

Ford 9 inch rear end with spool, 3:70's, anti roll bar already welded on (400.00 for this piece new) 31 spline moser axles
Need a stock rear for trade plus cash (make offer)

Complete fuel system for an LT1 making lots of power
SX/Aeromotive 1500HP pump, all feed lines plus return lines, and fittings, etc Weldon regulator (300.00) SX filter, y block and everyhting else plus rails with a -8 fitting on each side. also has a BG kick down Box so you dont have to run the pump full blast all the time which is perfect for the street. This system came off a mustamg running 8.30's and then I bought it and had the pump rebuilt and since have put about 200 miles on it. The rest probably has a total of 300 miles. All in great shape.
Make offer

Also have a Turbo 400 trans with crossmember, dip stick, trans, 700.00 converter (3800 stall) trans brake, cheetah shifter, etc basically everything you need to install a Turbo 400 in an F-Body built to handle 1000 HP +
Make offer prefer pick up but will ship for the right price



My email is lights4less2000@yahoo.com for offer

 

How well will this hold a 200 shot?
Price w/out the canton pan?

Who did the work?

 

I had a good friend of mine do the engine. He has built many motors and has helped some of the top racers in the country build their engines. He personally owns a 7 second ford Fairmont that he did all the work on himself and worked for precision turbo for a while.
The engine was made for the street and we were planning on spraying a 2 stage kit that was going to be 75 1st stage and then a 150 second stage.
I guess I would knock off 175.00 without the pan

 

sent you mail

 

Where you located?

 

A lot of your stuff you have listed at "buyer can come see" or "buyer must pick up" etc, but you don't list your location...

 

Sorry, I am in Portage, IN which is about 45 min from CHICAGO

 

Anyone thats interested, please email me

 

All still for sale

 

hey man you never sent me anything back on that email i sent you about the nine inch.

 

Hi, I replied to all emails, maybe something happened. email me again. sorry

 

Whats your bottom dollar on that turbo 400?

 

email me with ur asking price on the front welds .. just the fronts

thanx

 

Sent you mail.

 

Hey I need th 12 bolt if you still got email me! rfneill@charter.net